WELCOME TO ELECREALM store Product Description HDR Free Sync2 2xHDMI+2xDP Mini Driver Board for 12.5~15.6inch 32000x1800 UHD LCD

---The power adapter for the board is DC+12V 3.0A~5.0A.

---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard):

https://www..com/itm/402243169332

---Programmer for upgrading the firmware of this eDP controller board:

https://www..com/itm/193462681438 The HDR FreeSync2 2xHDMI+2xDP Mini Driver Board can drive the following 12.5~17.3inch 4K LCD. The LCD\'s connector is 40 pin, pin pitch: 0.4mm. LQ125D1JW34 NV125QUM-N81 B156ZAN03.4 LQ156D1JW02 LQ156D1JX01 LQ156D1JX02

---USB 3.0 to Displayport 4k adapter or HDMI-TO-DP adapter cannot be used as signal source for my this board+LCD. My this items cannot be fit for USB 3.0 to Displayport 4k adapter or HDMI-TO-DP adapter and it only can be connected to DP interface of the graphic card on the computer or notebook/laptop.

---The HDMI-TO-DP cable also cannot be used for this listing DP board+LCD.

---Via HDMI cable connected to Raspberry Pi 3, the controller board+LCD works very well on the Raspberry Pi 3 with the following resolutions: 1920x1080 @ 50Hz and 3840x2160 @ 24Hz! Content of the \"config.txt\" File on Raspberry: -------------------------------- disable_overscan = 1 hdmi_force_hotplug = 1 hdmi_ignore_edid = 0xa5000080 hdmi_group = 2 hdmi_mode = 87 Hdmi_cvt = 3840 2160 24 3 0 0 0 framebuffer_width = 3840 framebuffer_height = 2160 max_framebuffer_width = 3840 max_framebuffer_height = 2160 hdmi_pixel_freq_limit = 400000000 gpu_mem = 256 # Uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes hdmi_drive = 2 # Enable audio (loads snd_bcm2835) dtparam = audio = on disable_camera_led = 1 start_x = 0 dtparam = i2c1 = on .
---USB 3.0 to Displayport 4k adapter or HDMI-TO-DP adapter cannot be used as signal source for my this board+LCD. My this items cannot be fit for USB 3.0 to Displayport 4k adapter or HDMI-TO-DP adapter and it only can be connected to DP interface of the graphic card on the computer or notebook/laptop.

The 4K HDR Freesync controller board function description: 1 Power in (DC 12V: 5.5x2.5)

6

Earphone out 2 HDMI in(to 3840x2160) 7 Keyboard 3 HDMI in(to 3840x2160) 8 Speaker out(2 X 10W（8Ω）)

4

DP in 9 4Lane HRB eDP out 5 DP in 10 Board size LxWxH=118x75x10 mm The keyboard function description: 1 Exit/Select

4

Menu 2 + 5 Power on/off 3 -

6

LED(red/green)

Package includes:

---1× HDR Freesync 2xHDMI+2xDP Mini Driver Board

---1× edp signal cable( from the board to the LCD)

---1× keyboard

Payments

• We welcome PayPal (for MasterCard, Visa, Discover, American Express, and Electric Check).
• You should make the payment close within 7 business days of sale. No any surcharge! Unpaid sale winners will be forfeited after 21 business days.
• After you won, you simply go back to the sale page of the item and click on continue button then follow the instructions.
• buyers on multiple sales simply wait until all of the sales are ended. We would inform you of the pay time via email.
• We will report all NPB (Non Paying buyers) to and we reserve the right to leave Negative response for NPN. We reserve the right to refuse high buyers and any non-registered buyers leaving negative or hidden responses.
• Our prices do NOT include any customs duty or tax. Please verify it.

Refund and Return

• All returns must be informed before returning our merchandise.
• The Buyer is ought to notify the seller of all returned items within 7 days after receiving the package. We reserve the right refusing any requirement that informs the seller longer than 7 days.
• Refund and re-delivery will go on after the seller\'s receiving the returned item.
• The buyer is responsible for returned charge. If the returned item possesses no fault, the buyer also has to pay for the second delivery cost.
• Defective products must be returned within 7 days upon receiving (Note: returned product must be returned in original packing and must be in good condition).
• We refund the item\'s value only even if the item has been found to be defective.
• We\'ll share a few portion shipping cost for the second shipment in case of the package has been returned to the seller for reasons such as the buyer\'s local post service staff cannot deliver the package to the buyer based on buyer\'s recorded shipment address at paypal transaction report. But the second shipment will have to be handled after we\'ve received the returned package as well as the clearance of payment of the buyer\'s shared shipping cost portion .

We try to help out our customers as much as we can to rectify any problems.

response Policy

Our goal is empower you, the customer , with an online shopping experience that\'s built on an unparalleled knowledge base, customer service and technical support.
• If you are pleased with your purchase, please leave us positive response once receiving the item, and we will return the response upon you.
• If you have any problem with the outcome of the transaction or product, please don\'t respond with negative response before contacting us.
• We are very proud of our customer relations and will endeavor to fix any problem.