On Sale!! Creality K2 Plus 3D Printer 600mm/s High Speed Dual Smart AI CamerasFeature:🤗350x350x350mm: More space for creativity
🤗Step-servo Motor System: 30000mm/s² accelaration and quiet
🤗Actively Heated Chamber: Supporting engineering filaments
🤗Dual AI Cameras: Smart to adjust flow rate and alert failures
🤗Sturdy "Matrix" Frame: Die-cast tech for superb rigiditySpecification:
Printing Technology: Fused Deposition Modeling
Build Volume: 350*350*350mm
K2 Plus Dimensions: 495*515*640mm
K2 Plus Combo Dimensions: 495*515*916mm
K2 Plus Net Weight: 35Kg
Printing Speed: <600mm/s
Acceleration: 30000mm/s²
Printing Accuracy: 100mm±0.1mm
Layer Height: 0.05-0.3mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 4mm
Nozzle Temperature: ≤350°C
Heatbed Temperature: ≤120°C
Chamber Temperature: ≤60°C
Build Plate: Flexible build plate
Leveling Mode: Full-auto Leveling
XYZE Motor: Servo-step motor
File Transfer: USB Drive/Ethernet/WiFi
File Storage: 32GB EMMC
Wifi: 2.4GHz/5GHz
RFID Sensor in Printer: Included
Rated Voltage: 100-240V~ AC 50/60Hz
Display Screen: 4.3" color touch screen
Rated Power: 1200W
Supported Filaments: PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CF
Al Camera for Monitoring: Standard
Al Camera for Calibration: Standard
Power Loss Recovery: Yes
Auto Filament Relay: Yes
Filament Tangle Detection: Yes
Air Purifier: Yes
Input Shaping: Yes
Lighting kit: Yes
Active Bed Tilt Calibration: Yes
Active Belt Tensioning: Yes
Active Chamber Heater: Yes
RFID-tagged Filaments: Yes
Printable File Format: Gcode/3MF
CFS Compatibility: Yes
Number of CFS Extensions: ≤4
Slicing Software: Creality Print 5.0 or newer versions
UI Languages: English/German/Spanish/French/Italian/ Portuguese/Russian/Turkish/Japanese/ Korean/ChinesePacking List:1x K2 plus 3d printer（Please note: CFS is not included. If you need it, CFS can be purchased separately in this store. Please contact customer service.）FAQ:1.What are its key differences from K1/K1 Max? K2 Plus is the highest edition in the 2nd generation of K series flagship 3D printers. It offers an ultra-large build volume of 350*350*350mm and features the extruder, a closed-loop motor system, an active chamber heater, etc. And it supports the intelligent CFS unit for multi-color 3D printing and automatic filament backup.2.Key specifications of K2 Plus? 350*350*350mm build volume; 600mm/s max speed,30000mm/s² max acceleration; nozzle temperature up to 350℃; heatbed temperature up to 120℃. chamber temperature up to 60℃. 3.Is CFS any good to me besides multi-color 3D printing?CFS is actually an intelligent filament management system. It enables automatic filament loading and unloading in addition to multi-color 3D printing. So, it can save you the troubles of filament replacement. And when the filament backup function is on, if the current filament spool is running out, it can continue by selecting and loading another spool automatically.It also makes a well-sealed drying box that you can store filaments for a long time. 4.What are the advantages of closed-loop servo motors? For K2 Plus, all XYZ axis and the extruder are driven by closed-loop servo motors. Unlike an open-loop step motor, the servo motor offers 32768 micro-steps for each revolution. So it achieves high torque, smooth and quick response, and great step accuracy. The average noise at standard speed is within 50 dB.Even better, since the motor is regulated by FOC (Field-oriented Control) based on varying voltages. It will greatly reduce the heat runaway and avoid clogs caused by overheating. 5.How is the auto leveling of K2 Plus?K2 Plus uses two optical distance sensors on Z-axis for auto tilt adjustment and a strain guage in the printhead for auto leveling. So it can ensure accurate leveling with less compensation. The whole process is automated without your attention. Moreover,the aluminum heatbed is 5mm thick and hard to deform, so the leveling accuracy can be well guaranteed. 6.What filaments does CFS support? CFS can use any flament spools with a diameter of 197-202mm. Creality paper spools are compatible. CFS supports most filaments such as PLA/PETG /ABS/ASA/PA-CF, but not with flexible filaments such as TPU and damp PVA/BVOH. 7.How many AI cameras does K2 Plus have? K2 Plus has two cameras. One is located close to the nozzle. It is used for flow rate and PA(Pressure Advance)calibration. Another is attached to the front frame. It is used for video monitoring and print failure detection.PaymentDelivery Terms of salesAbout usContact usPayment
- We accept payment via Payoneer.
- Please accomplish payment within 5 business days after you won the item.
Delivery
- All your orders will be shipped within 1-2 business days and updated tracking info.
- Please make sure your address is full and correct, so that your order will be soon shipped and delivered smoothly.
- Most orders will adopt standard shipping, which usually needs 3-5 biz days.
- Any PO BOX addresses need to be confirmed if delivery or not.
Terms of sales
- 1-month-returning for all orders after they are proved defective/damaged/faulty (videos or photos about it are
About us* Founded in 2014 by four 3D printing enthusiasts, Creality is a top global manufacturer of 3D printers. Our range of products includes DIY and resin 3D printers, 3D scanners, laser engravers, and filaments. Currently we host four brands of 3D printers: Creality as the master brand, and the three sub-brands of Ender, HALOT and Sermoon. Capitalizing on our innovatively leading technologies and products, we also offer consumer and professional printing solutions for makers, designers, schools and enterprises. Contact us
- Customer Service Hours: 9:00AM - 18:00PM BST (Beijing Standard Time) .
- You can also contact our official website customer support.
