SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories
You may also like
Carrying Handle Picatinny Rail Mount Iron Sights Removable Adjustable
22.79 USD
Free shipping
For Samsung Galaxy S22 S21 Ultra Plus 5G Anti-Spy Privacy Glass Screen Protector
4.87 USD
Free shipping
4PCS SCI R3-14C Panel Mount Chassis Fuse Holder For 6x30mm Glass Fuses 10A 250V
11.79 USD
Free shipping
5Pcs Dc 5-120V Voltmeter Green Led Panel 3-Digital Display Volt Meter 2-Wire USA
15.28 USD
16.79 USD
Free shipping
9%
offFiber Optic Glock Sights For Models 17 19 22 23 24 26 27 33 34 35 38 39 45
19.79 USD
Free shipping
Reufrbished Printer Print Head fit for i9900 I9950 Pro900 9900i Mark II QY6-0076
Product Description
Reufrbished QY6-0076 Printhead for i9900 I9950 IP8600 Pro900 9900i Mark II
Warm Tip:
Please note this product is used for the second generation printer:I9900 I9950 IP8600 Pro9000 9900i Mark II QY6-0076. Not for the first generation printer: I9900, IP8500, I9950, IP9100, Pro9000 qy6-0055. Please pay attention to this difference. Before you purchase, please figure out your own machine is the first generation or the second performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
Product Condition : Original Refurbished Printhead ,95% New.
Warranty : One Year Free Warranty , Life-long Service.
OEM code: QY6-0076 QY6-0076-000 QY60076 QY6 0076
Compatible Models:
Fit for qy6-0076 iP8500/9910 Pro9000/i9900MarkII Printers
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
Before you install this product, you need to pay attention to:
1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.
2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.
3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.
4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.
5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.
6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.
- About Us
- Payment
- Shipping
- Terms
- Contact Us
About Us
Founded in 2012, VIPJQ have professional development and sales, and are involved in various products, providing customers with various high-quality products.
Since its establishment, VIPJQ has always adhered to the service concept of "customer first" and the management concept of "pursuit of quality",
and is committed to providing customers with high-quality original designs.
We commit to provide you the best innovative, quality products & professional services with competitive prices.
We value every customer, and we look forward to providing solutions for your business needs to help your business achieve its goals, please contact us immediately! We are all about you!
Payment 1. We Accept Visa, Master, Amex, Google Pay，Discover, Paypal, etc, many payment ways.
2. Item will be shipped immediately on the same or next business day of receiving your payment. Shipping
US Buyers
Parcel will ship via USPS/DHL/FedEx from our United States warehouse
Shipping time
The item usually will be dispatched within 3 days after you ordered.
And it usually takes 3-10 working days to delivery depends on buyers' address or other majeure on the stand behind everything that we sell and will do everything possible to assure you are satisfied
Terms
When you receive your purchase if you are not 100% satisfied, please sent me message and we will do our best to meet your expectations. If you still want to return your purchase, simply ship the item(s) back to us and we will refund your original purchase price and the original shipping charge.We must be notified of the intent to return your item within 30 days of receiving the item.
How to return
1. Please ask us for return address .
2.Shipping back the package .
3.Sent us the return tracking number.
4. Refund full to you when we receive the package.
Contact Us
We can be contacted at any time through messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out!
Please give us a chance to resolve the issue before leaving us a response.
Copyright © 2022 Tongtool
