DocumentFeature:Stamp size on surface, convenient to pick the one you need.The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.Specification:Material: BrassScrew Thread: M6Nozzle Diameter: 0.4mmInput Diameter: 2mmTotal Dimension: 13x8mm / 0.51x0.31 inch (L*D)Package Content:4 x Brass NozzleNOTE:Small accessories, please keep away from children.After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.How to Replace Nozzles?1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.Notice: Please don’t touch the old nozzle and heat block.3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

• 0.4mm 3D Printer Nozzle, 30pcs M6 Thread for MK8 3mm Extruder Print, Brass USD 11.03
• 0.4mm 3D Printer Nozzle, 14pcs M6 Thread for V5 V6 3mm Extruder Print, Brass USD 8.14
• 0.4mm 3D Printer Nozzle, 30pcs M6 Thread for V5 V6 1.75mm Extruder Print, Brass USD 12.52
• 0.2mm 3D Printer Nozzle, 20pcs M6 Thread for V5 V6 1.75mm Extruder Print, Brass USD 9.36
• 0.4mm 3D Printer Nozzle Head M6 Thread for V5 V6 1.75mm Extruder Print 2pcs USD 7.11
• 0.6mm 3D Printer Nozzle, 24pcs M6 Thread for MK8 1.75mm Extruder Print, Brass USD 9.55

0.4mm 3D Printer Nozzle Head M6 Thread MK8 1.75mm Extruder Print Brass 4pcs

Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon Brass

Screw Thread: M6

Nozzle Diameter: 0.4mm

Input Diameter: 2mm

Total Dimension: 13x8mm / 0.51x0.31 inch (L*D)

Package Content:

4 x Brass Nozzle

NOTE:

Small accessories, please keep away from children.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

Hot Item

• 0.4mm 3D Printer Nozzle Head M6 Thread for MK8 1.75mm Extruder Print 4pcsUSD 9.56
• 0.4mm 3D Printer Nozzle, 20pcs M6 Thread for V5 V6 3mm Extruder Print, BrassUSD 9.21
• 0.3mm 3D Printer Nozzle, 24pcs M6 Thread for MK8 1.75mm Extruder Print, BrassUSD 10.69
• 0.6mm 3D Printer Nozzle, 30pcs M6 Thread for V5 V6 1.75mm Extruder Print, BrassUSD 11.87
• 0.6mm 3D Printer Nozzle, 24pcs M6 Thread for MK8 1.75mm Extruder Print, BrassUSD 9.55

Payment

• We accept payment.
• Please do not email us to ask for other payment option.
• We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.

Shipping

• For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
• Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.

Return Policy

• If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.

About Us

• We are continually expanding our product selection to better serve your need.
• We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
• If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help 3D Printer Nozzle Head M6 Thread MK8 1.75mm Extruder Print Brass 4pcs

  Feature:

  Stamp size on surface, convenient to pick the one you need.

  The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

  Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon Brass

  Screw Thread: M6

  Nozzle Diameter: 0.4mm

  Input Diameter: 2mm

  Total Dimension: 13x8mm / 0.51x0.31 inch (L*D)

  Package Content:

  4 x Brass Nozzle

  NOTE:

  Small accessories, please keep away from children.

  After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

  How to Replace Nozzles?

  1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

  2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

  Notice: Please don’t touch the old nozzle and heat block.

  3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

  • 0.4mm 3D Printer Nozzle, 30pcs M6 Thread for MK8 3mm Extruder Print, Brass USD 11.03
  • 0.4mm 3D Printer Nozzle, 14pcs M6 Thread for V5 V6 3mm Extruder Print, Brass USD 8.14
  • 0.4mm 3D Printer Nozzle, 30pcs M6 Thread for V5 V6 1.75mm Extruder Print, Brass USD 12.52
  • 0.2mm 3D Printer Nozzle, 20pcs M6 Thread for V5 V6 1.75mm Extruder Print, Brass USD 9.36
  • 0.4mm 3D Printer Nozzle Head M6 Thread for V5 V6 1.75mm Extruder Print 2pcs USD 7.11
  • 0.6mm 3D Printer Nozzle, 24pcs M6 Thread for MK8 1.75mm Extruder Print, Brass USD 9.55
  Hot Item
  • 0.4mm 3D Printer Nozzle Head M6 Thread for MK8 1.75mm Extruder Print 4pcsUSD 9.56
  • 0.4mm 3D Printer Nozzle, 20pcs M6 Thread for V5 V6 3mm Extruder Print, BrassUSD 9.21
  • 0.3mm 3D Printer Nozzle, 24pcs M6 Thread for MK8 1.75mm Extruder Print, BrassUSD 10.69
  • 0.6mm 3D Printer Nozzle, 30pcs M6 Thread for V5 V6 1.75mm Extruder Print, BrassUSD 11.87
  • 0.6mm 3D Printer Nozzle, 24pcs M6 Thread for MK8 1.75mm Extruder Print, BrassUSD 9.55
  Payment
  • We accept payment.
  • Please do not email us to ask for other payment option.
  • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
  Shipping
  • Usually we ship your order out within 24 hours in business day.
  • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
  • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
  Return Policy
  • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
  • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
  About Us
  • We are continually expanding our product selection to better serve your need.
  • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
  • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.