 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2-Pack 3D Printer Build Plate Compatible with Bambu Lab P2S, P1S, A1, X2D, X1, X1C P1P: Blue Low-Temperature Printing Platform, Black PEI Dual-Sided Sheet with Smooth and Textured Surfaces Product list: 2PCS 3D printer platform, one is a low-temperature cold print sheet, and the other is a PEI smooth +textured powder printing build plate. Blue Low Temperature Cold Print Bed: The cold printing build plate is suitable for PLA with a low-temperature range of only 35-40°C, and PETG with only 50-55°C. Compared with traditional PEI spring steel plates, it has higher print adhesion for low-temperature printing of PLA and PETG. Its superior first-layer adhesion performance helps you avoid using glue, prevents edge warping, and keeps prints from falling off. Black PEI Textured Surface + PEI Smooth Surface Build Plate: The smooth PEI surface requires the use of a 3D printing glue stick to prevent models from slipping off, except when using PLA filament. Additionally, please remove the protective film from the smooth PEI surface before use. The textured PEI surface offers stronger adhesion than the gold PEI surface, allowing models to adhere firmly to the build plate without the need for glue. Printing Sheet Recommendations: For PLA and PETG, we strongly recommend using the Blue Low-temperature Printing Bed; the lower heated bed temperature helps reduce energy consumption. For high-temperature filaments such as ABS, TPU, ASA, PETG, TPU, Nylon, PA, and PC, we recommend using the Black PEI Plate. The textured side can withstand temperatures up to 300°C, while the smooth side can withstand temperatures up to 200°C. Please select the correct print bed in the software before printing. Maintaining Adhesion on the Print Bed: 1. Do not clean either plate with alcohol to avoid damaging the coating. 2. After five prints, clean the print bed using a lint-free cloth, soap, and water. Be sure to rinse off all soap residue thoroughly. Package List: 2PCS 3D Printer Platform: Blue Cold Build Plate Low-Temperature Print + Black PEI Smooth and Textured Sheet  |
|
