5PCS 380x260mm nFEP(PFA) Film for Resin 3D Heat Resistance: -240°C to 240°C

- UV Transparency: Higher than steps

1.Remove screws to detach the steel rings from the resin vat.

2.Remove the screws to seperate the steel rings and change the nFEP film.

3.Put the new nFEP film in-between the two steel rings and install those screws back. You may need to force the screw in.

4. Install the steel rings back to the resin vat and ensure the nFEP film is clean and tensioned properly.

Note: please remove the protective film on both sides of the nFEP before List:

5 Pieces 380x260x0.127mm nFEP(PFA) Film

Higher printing success rate: nFEP is a specially treated FEP film which has a smoother and more delicate surface. Models printed with nFEP film will have lower viscosity levels, so the pulling force won't be as strong during printing. This means that the success rate will be higher.
Less replacement frequency: Compared with traditional FEP film, nFEP (PFA) is made of higher quality materials, which makes it has higher tensile strength and elongation at break. Which leads to each layer being more easily removed when lifted because the PFA fights back more, and a longer life for PFA films because of slightly higher crack resistance.
Better printing quality: nFEP film, with its excellent peeling performance and smaller deformation during peeling, allows the printed model to have better print quality and rich details. More suitable for large-format SLA and LCD 3D printers.
High light transmittance: nfep has a light transmittance of more than 95% and can withstand a high temperature of 220°C, which means that it can work better when printing large models for a long time.
Dimensions and applicable models:The size of nfep film is 380x260x0.127mm, a set contains 5 pieces. It is compatible with Elegoo Jupiter, Jupiter SE, Anycubic Photon M3 Max 12.8-13.6 inches resin 3D printers.