Canon PF-10 Print Head 0861C001 - imagePROGRAF PRO Series, Canon PF-10 replacement print head, product code 0861C001, for theimagePROGRAF PRO series of large format printers. It is a single integrated12-channel head covering all twelve inks, and Canon designed it as a userreplaceable part - no service call is required to fit it.
Print heads are consumables in these machines. Nozzles clog, individualchannels drop out, and eventually the printer reports a head error thatcleaning cycles will not clear. At that point the head is replaced, notrepaired. Keeping a spare on hand is normal practice in productionenvironments, where a dead head means a stopped workflow rather than aninconvenience.
This is a Canon genuine part, purchased new in Japan and shipped directlyfrom / Manufacturer : Canon Inc. (Japan)Model : PF-10Product code : 0861C001Type : Replacement print head, genuineChannels : 12 colour, single integrated unitReplacement : User replaceableQuantity : 1JAN code : imagePROGRAF
PRO-1000 PRO-1100 PRO-2000 PRO-2100 PRO-2600 PRO-4000 PRO-4000S PRO-4100 PRO-4100S PRO-4600 PRO-6000 PRO-6000S PRO-6100 PRO-6100S PRO-6600 GP-2000 GP-4000 GP-2600S GP-4600S GP-6600S
Please confirm your printer model against this list before Canon genuine part, not a refurbished, refilled, or third-party unit- Single integrated head covering all 12 ink channels- User replaceable - no engineer visit required- Sensible spare to hold in a production environment where printer downtime is costly- Covers the full imagePROGRAF PRO and GP series print quality on imagePROGRAF PRO and GP series large formatprinters where nozzle clogging, banding, or dropped colour channels can nolonger be resolved by cleaning cycles, or where the printer reports a printhead error. Used in fine art and photographic printing studios, proofing,poster and signage production, and CAD and GIS NOTES FOR INTERNATIONAL FIRMWARE REQUIREMENTUser print head replacement requires the printer to be running firmwareversion 1.10 or later. Updating the firmware is the owner's responsibilityand is done through Canon's own support channels. Please confirm yourprinter's firmware version before ordering.
CONFIRM YOUR PRINTER MODELThe compatible model list above is comprehensive, but imagePROGRAF modelnaming is easily confused - PRO-4000 and PRO-4000S are different machines,as are PRO-4100 and PRO-4100S. Check the model designation on your printerrather than working from memory.
HANDLE AS AN ELECTROSTATIC SENSITIVE COMPONENTLeave the head sealed in its protective packaging until the moment ofinstallation. Do not touch the nozzle face or the electrical contacts, donot set the head down on its nozzle face, and follow Canon's installationprocedure in the printer manual exactly. Damage caused by incorrecthandling during installation is not covered.
STORAGEStore in the sealed packaging, upright, away from heat and direct sunlight,and install within a reasonable period. Print heads are wet-processcomponents and are not indefinitely shelf-stable.
INSTALLATION IS A ONE-WAY OPERATIONOnce a print head has been installed and primed with ink it cannot bereturned to unused condition. Please be certain of compatibility beforeopening the package - returns cannot be accepted on an installed head.
GENUINE PARTCanon supplies are widely counterfeited. This is a genuine Canon productsourced through Japanese retail. Product code and packaging are shown in thephotographs.
WARRANTYCanon warranty and support are handled by the Canon organisation for theregion of original sale. A part purchased in Japan is supported through theJapanese channel; Canon subsidiaries in other countries are not obliged toprocess a claim on it.
NO ELECTRICAL POWER REQUIREDThis is a printer component drawing power from the printer itself. It has nobattery and no mains connection, so there are no voltage, plug, or powercompatibility concerns.
JAPANESE DOMESTIC PACKAGINGThe packaging and any printed material are in Japanese. Installation isdescribed in your printer's own manual in your own language.