Model NameFSP400-50FDBUL #62368-1Wattage 400WDimension 150mm (L) × 81.5 mm (W) × 40.5mm (H)Product Highlight Efficiency LevelMeets 80 Plus Gold Altitude5,000MGeneral Specification Effciency90% 230VAC Voltage Regulation+3.3V, +12V, +5V, +5SB: ±5%
-12V: ±10%Input Electrical SpecificationInput Frequency 47 ~ 63 Hz Input Current 115V@ 6.0 Amps-rms maximum
230V@ 3.0 Amps-rms maximumOutput SpecificationHold-up time 115V/60Hz 10mSec. Minimum@100% Load,
230V/50Hz 12mSec. Minimum@100% Load Ouput Voltage Regulation +3.3Vdc output : +3.7 Vdc minimum, + 7Vdc maximum
+5Vdc output : +5.7 Vdc minimum, + 7Vdc maximum
+12Vdc output : +13.3 Vdc minimum, + 16Vdc maximum
Output Rise Time 115V-rms/230V-rms +5V 20ms Maximum
Output Rating +3.3V:50mV p-p
+5V:50mV p-p
+12V:120mV p-p
-12V:120mV p-p
+5Vsb:50mV p-pEnvironmental RequirementTemperature RangeOperating : 0 to +50?
Storage :-40 to +80? MTBFThe power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25?, maximum-output load, and nominal AC inout voltageSafety CE,FCC,UL/cUL,TUV

Output Voltage and Current Rating

+3.3V+5V+12V1-12V+5VsbRipple-Noise(R-P) mV50mV50mV120mV120mV50mVRegulation Load %±5%±5%±5%±10%±5%Output Max.(A)14A16A41A0.3A3AOutput Min.(A)0A0A0.1A0A0A

Notes

• The +3.3V and +5V total output shall not exceed 90 watts.
• The total output shall not exceed 400 watts
• Ripple and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.