G.Skill RipJaws V rot 16 GB (2x8GB) F4-3000C15D-16GVRB DDR4-3000 RAM
Memory TypeDDR4Capacity16GB (8GBx2)Multi-Channel KitDual Channel KitOC Profile SupportIntel XMP 2.0Tested Speed (XMP)Up to 3000* MT/s* Requires overclocking/BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
Tested Latency (XMP)15-16-16-35Tested Voltage Checking (ECC)Non-ECCSPD Speed (Default)2133 MT/sSPD Voltage (Default)1.20VFan IncludedNoWarrantyLimited LifetimeFeaturesIntel XMP 2.0 Memory Overclock ProfileAdditional NotesIf used with 11th Gen Intel Core processors, 10th Gen Intel Core non-K processors, or AMD Ryzen processors, DDR4-3000 is not supported, so memory frequency may be limited to DDR4-2933 or lower when XMP is enabled.Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.Prior to enabling XMP, memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.For memory kits with XMP, enable XMP/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP is an act of overclocking and requires BIOS setting adjustments. Please refer to the "How to Enable XMP/EXPO" guide.Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.