618 Mid-Year Sale
Geeetech 3D printer Filaments+accessories, clearance sale, lowest price ever ，first come first served
Upgraded GEEETECH GLA10 V2 Auxiliary Leveling Device Elveler for FDM 3D printer
Tips:
1. Please read this manual carefullyforusingGLA10-V2 correctly.
2. Please scan the QR code or log in to our website to get the G-code file that GLA10-V2 needs.
3. Please pay attention to safety whenlevelingthe GLA10-V2hot bed, so as not to hurt your fingers by the moving hot end.
4.when using theGLA10-V2, adjust the leveling screws under the hot bed ,when the green LED flashing ,it means the corner is (almost) ready to go .
5.GLA10-V2 is only applicable to 3D printers with adjustable nuts on the hot bed .
LevelingPreparation
1.Installthe included CR2032 battery in the battery holder on the GLA10-V2 , take care not to install the wrong positive and negative terminals when installing the battery.
2. Please enter the URL in the browser, or scan the QR code belowtovisit our website.Thendownload theGLA10-V2 relatedG- code file. We provide the corresponding G-codes for different hotbed sizes. The files with the "Level" mark are the leveling auxiliary files, and the G-codefileswith the "Test" mark are the test files after the adjustment is completed.
3. Please select thecorrectG-code file according to the size of your 3D printer heat bed, copy the G-code to the Micro SD card and insert it into the printer.
4. Please clean up the residualfilamenton the nozzle so as not to affect the leveling accuracy.
StartLeveling
1.Power onthe3Dprinter, select theleveling auxiliaryG-code pre-installed in the Micro SD, and start the hotbed leveling.The levelingauxiliaryG-code will pause at the four corners of thehotbed for 25s respectively. After 25s, the nozzle will move to the next point. After the pause at the fourthcorners, the printer will exit the leveling.
2. After the leveling starts, the nozzle of the printer will automatically lift a certain distance. At this time, please place the end of the GLA10-V2 with a cross pattern under the nozzle, and ensure that the nozzle is directly above the cross pattern of the GLA10-V2.
3. At this time, pleasepress andfixthe otherend of the GLA10-V2 with one hand, and then quickly adjust thebotbed leveling nut corresponding to the current position of the nozzle with the other hand. When you see the green LED on the GLA10-V2 just lit up, or hear the buzzer sound , it means that the current height of thehotbed is just right. At this time ,please take the GLA10-V2out from under the hot endand wait for the hot end to move to the next position of the hot bed . Take care to make sure that GLA10-V2 is just lit up at all four corners of the hot bed , or that the buzzer has just lit up .
4. After leveling, please use the downloaded test G-code to verify the leveling effect.
5. If any problem is found during the leveling test, please re-level thehotbed .
Parameter
Battery parameter：CR2032,3V
Product style="margin-left: 28px;">Packing style="margin-left: 28px;">Product weight：19g
Packing weight：57g
THUNDER thickened Teflon tube [outer diameter 6mm, inner diameter 2mm, length 1M, with 2 PC06-M6, 2 PC06-01 pneumatic connectors]
Parameter:
Product name: PTFE tube (Teflon tube)
Product color: transparent
Temperature range: -190℃~260℃
Specifications: inner diameter 2mm, outer diameter 6mm
Practical scope: suitable for 1.75mm consumables
Product features: corrosion resistance, high and low temperature resistance, unique self-lubrication, aging resistance, etc.
Features:
1. Corrosion resistance, able to withstand the action of all strong acids (including aqua regia), strong oxidants, reducing agents and various organic solvents except molten alkali metals, fluorinated media and sodium hydroxide above 300 °C
2. Insulation resistance, not affected by the environment and frequency, the volume resistance can reach 1000 ohms, the dielectric loss is small, and the breakdown voltage is high.
3. High and low temperature resistance, little effect on temperature, wide temperature range, usable temperature -190℃~260℃
4. Unique self-lubricating property, with the friction coefficient of plastics, it is an ideal oil-free lubricating material
5. The protruding surface is not sticky, and none of the known solid materials can adhere to the surface
6. Radiation resistance and low permeability, long-term exposure to the atmosphere, the surface and performance remain unchanged
7. Incombustibility, the oxygen limit index is below 90.
Package Included:
1、1*1m PTFE tube
2、2*PC06-M6 2*PC06-01
3、4 *C-shaped fixed buckle
Upgrade Geeetech 3D Printer Platform Tempered Glass Bed Plates 210x200x3mm
About this item:If you are going to use the superplate glass to replace the black mylar sticker, one tip need your attention please, in case of the nozzle touch and scrach the platform:Because the superplate glass is 3mm thicker than mylar sticker, After you replace the glass with existing mylar sticker,pls remember to up the limit switch on Z axis for about 3mm, then do leveling before you start printing and you can also slightly adjust the knob under platform.We choose silicon caroffere glass with microporous coating as the building platform for 3D printer, without the need of attaching the masking tape.The silicon caroffere glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature. The special coating is inorganic and has a hardness of 8 Mohs, hence of high durability.Compared with common building platform, this kind of tempered glass is of better adhesion and flatness and easy to take prints off. Besides, it is easy to clean with water or alcohol. Geeetech Superplate silicon caroffere glass platform is regarded as a reliable building platform by 3D printing hobbyists.Features:Better adhesion:Superplate is coated with micropores, having strong adhesion during printing.High-performance:The silicon caroffere glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature.Reliability:The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.Easy to clean with water or alcohol.Easy to remove your print by hand without the help of scraper.Geeetech 3D Printer Aluminum Plate 235x235x3mm Hot Bed Kit for A10 A10M A10T US
NOTE: Buy it before confirmed it is same with yours
Product Description
Size: 235*235*3mm
Kit: thermistor and hot bed wire welded
Suitable for: Geeetech A10, A10M, A10T
Packet include：
1* Aluminum PlateHot Bed Kit
Geeetech 3D Printer Glass Superplate 235mm*235mm*3mm Excellent Adhesion US
Information:
if you are going to use the superplate glass to replace the black mylar sticker, one tip need your attention please, in case of the nozzle touch and scrach the platform:
Because the superplate glass is 3mm thicker than mylar sticker, After you replace the glass with existing mylar sticker, pls remember to up the limit switch on Z axis for about 3mm, then do leveling before you start printing and you can also slightly adjust the knob under platform.
We choose silicon caroffere glass with microporous coating as the building platform for 3D printer, without the need of attaching the masking tape.
The silicon caroffere glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature. The special coating is inorganic and has a hardness of 8 Mohs, hence of high durability.
Compared with common building platform, this kind of tempered glass is of better adhesion and flatness and easy to take prints off. Besides, it is easy to clean with water or alcohol. Geeetech Superplate silicon caroffere glass platform is regarded as a reliable building platform by 3D printing hobbyists.
Features:
Better adhesion: Superplate is coated with micropores, having strong adhesion during printing.
High-performance: The silicon caroffere glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature.
Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
Easy to clean with water or alcohol.
Easy to remove your print by hand without the help of scraper.
Size: 235mm*235mm*3mm
Geeetech Single Hot End Kit 0.4mm Head Extruder for A10 A20 3D Printer
One in and one out of the extrusion head
Description
This 1-in-1 out hot end kit is designed for A10,A20,A30,A30_Pro 3D printer. It can greatly reduce the risk of clogging or jamming so as to save filament for you. With its good craftsmanship, filament could be printed out of amazing prints. Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish. Printing enriches your daily life~
Specification:
1.Number of filaments:1
2.Filament material: PLA/ABS
3.Filament size:1.75mm
4.Nozzle size:0.4mm
5.Heater cartridge:24V,40W;diameter & length:6mm*20mm
6.Thermistor: PT3-25E2-S2
Geeetech 3D Printer Parts MK2A PCB Heatbed Hot bed 216*216*2mm Universal RedProduct name: MK2A PCB Heatbed 3D Printer PartsVoltage：24VProduct size: 216mm*216mm*2mmBox function: Equipped with Me Creator2 machine hot bed heating
GEEETECH A10M A20M 2 in 1 out Mix Color Hotend Kit 0.4mm Nozzle Hot 3d Printer
Description
This 2 in 1 out hotend kit is designed for Geeetech A10M and A20M 3D printer. It can greatly reduce the risk of clogging orjamming so as to save filament for you.With its good craftsmanship, two pieces of different color filament could uniformly mixedtogether to create amazing prints. Besides, itsstandard0.4mm nozzle delivers satisfactorily smooth surface finish. Mix-color printing enriches your daily life~
Specifications:
1. Number of filaments: 22. Filament material: PLA/ABS3. Filament size: 1.75mm4. Nozzle size: 0.4mm5. Heater cartridge: 20V, 40W; diameter & length: 6 *30mm6. Thermistor: PT3-25E2-S27. Net weight: 89.60g8. Gross weight: 140g
GEEETECH 3D Printer Parts 3 in 1 Spring Steel Plate+PEI+Magnetic B Base 260*260
The combination includes:Steel spring plate+PEI+magnetic B base
Feature:
1. PEI materials: allow your print to easily adhere to the printing surface,
2.It includes PEI printing surface + spring steel plate+ magnetic disk sticker
3.flexible and removable.
4.3-in-1 plate: steel spring plate + PEI + magnetic B base.
5.to withstand over 130 ℃ / 226ºF
Installation process:
1.Simply glue a PEI to the top of the flexplate,
2.attach it to your print bed via the magnetic mounting base, do a one-time adjustment of the Z-height and start printing.
3.When the printing is complete, simply remove the flex plate, flex it and remove your prints!
Geeetech Me Creator2 3D Printer Heat Bed Full Fixed Hotbed Kit 24V 152*152*1.6mm
Product Description：
Fully fixed hot bed kit, the aluminum plate and hot bed bracket are fixed with 12 screws. The height of the aluminum plate is not adjustable,which can greatly strengthen the strength of aluminum plate. Compared with the traditional hot bed, fixed hotbed can effectively avoid hot bed uneven due to thermal expansion and contraction when aluminum plate in heating.Hot bed kit includes: Aluminum plate(without rubber magnet), hot bed bracket, thermistor, hot bed power supply wire, pulley;Specification： Rated Voltage：24V
Hot bed resistance：2.2Ω
Rated Power：260WPacking Includes: 1x Hotbed KitGeeetech 3D Printer Stainless Steel Filter Funnel Resin Filter Cup for UV Resin
Description:
The funnel is made of stainless steel, easy to use and clean, and effectively filters the contaminants while the resin is poured into the bottle
The strainer are perfectly clean, tight and the mesh is the right size for filtering resin. Thanks to the funnel, the residues can be filtered back clean and suitable for filtering resin.
Stainless steel filter (sits very well in the stainless steel funnel). More practical than the paper filter, simply wipe them out after use and clean them with isopropanol.
Fits all conventional resin bottles with bottle neck width in 15 mm
The stainless steel filter is not only for filtering the resin of the printers, but for any non-aggressive technical product, typically pouring paints and varnishes into spray guns using filter and avoiding clogging of the nozzle.
Specification:
Material: 304 Stainless Steel
Size: 4.3 inches in diameter, 3.9 inches in height, stem length: 1.7 inches,
diameter of the spout is 0.6 inches
1.The filter operating temperature within Acidic :0~80℃, alkaline:0~100℃
2.Before using the filter, wash in warm and soapy water
3.Please clean stainless steel funnels after use
Package Included:
1 x Stainless Steel Funnel
1x Strainer Filter
Geeetch 3D Printer 42-40 Stepper Motor Extruder for 1.75mm Filament 3D Printer
