Product detail:

Name:

Textured PEI (no/with magnetic Base)

Sizes:

Note:

DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!!

Note 2:

PEI must be used with the magnetic base.

If you are going to buy a product without magnetic base,

please make sure you already have a magnetic base.

Print Instructions:

1. When first time printing, keep the built sheet smoothing (the nozzle and the hot bed distance adjust to A4 paper thickness).

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.

3. Adsorb the PEI side spring steel plate on the magnetic base.

4. we suggested printing temperature: PLA 60℃ PETG 70-80℃ ABS 90-100℃.

PEI sheet can be work in 160°C~180°C for a long period of time, PEI can not over 200°C.

5. Take off the sheet from printing surface and bend the sheet slightly, you can easy to take the model.

Package including:

1. No magnetic base: 1 piece Spring Steel Plate.

2. With magnetic base: 2 pieces, 1 piece Spring Steel Plate + 1 magnetic base.

More Size:

300*300mm for CR10 or other same size hotbed

350*350mm for FYSETC Voron 2.4 or other same size the print surface before and after a print with Isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength.Regardless of any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface.If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the