TEAMGROUP T-Force Vulcan Z 32GB (4 x 8GB) DDR4-3000 CL16 Desktop Memory
Four TEAMGROUP Vulcan Z 8GB modules, 32GB total. Tested and working - all four were verified working before removal from a running desktop system.
SPECIFICATIONSPart number: TLZGD48G3000HC16CBKCapacity: 8GB per module, 32GB total (4 modules)Speed: DDR4-3000 MHz (PC4-24000)Timings: CL16-18-18-38Voltage: 1.35V (XMP 2.0)Form factor: 288-pin DIMM, non-ECC unbufferedHeat spreader: Black aluminium, low profile
PLEASE NOTE ON MATCHINGTLZGD48G3000HC16CBK is TEAMGROUP's single-module part number. Offered here are four of that same module - effectively two 2x8GB kits - rather than one factory-binned four-stick set. They are identical parts and run together normally, but if you specifically need a single factory-matched quad kit, this is not that.
CONDITIONUsed, pulled from a working system. Heat spreaders intact, no bent pins, no corrosion, contacts clean. See photos - the modules pictured are the exact ones you will receive.
COMPATIBILITYStandard desktop UDIMM memory - fits any motherboard that accepts DDR4 DIMMs. This is NOT ECC or registered server memory and will not work in a board that requires RDIMMs.
The 3000MHz rating is achieved via XMP 2.0. You must enable XMP (or DOCP/EXPO on AMD boards) in BIOS to reach 3000; otherwise the modules default to a slower JEDEC speed.
Filling all four slots on some AMD boards can make 3000MHz harder to hold than running two sticks - if you hit instability, that is normal for a 4-DIMM configuration and usually settles with a small voltage or frequency adjustment.
The low-profile heat spreader clears most large air coolers, which is a common problem with taller RGB memory.
SHIPPING AND RETURNSShips free within the US, packed in antistatic bags with padding in a rigid box. No returns accepted.