Trianglelab V6 Compatible Plated Copper Heat Block Cartridge Style A aftermarket Trianglelab replacement aluminium V6 heater block, suitable for cartridge-style temperature sensors. What is Included: TL V6 Comptaible Heater Block (Max safe printing temperature 450c, block can withstand up to 500c) TL V6 Style Silicon Sock (Max 280c) -Sock may be Orange/Blue depending on batch Remember to remove sock when printing above 280c, and ensure all other other hardware such as nozzle/heat break support those temperatures. Compatibility: V6 HOTEND Compatible with PT100 V6 HOTEND Compatible with Prusa I3 3D printer Compatible with M6 threaded port third-party custom Hotend Features: It is resistant to high temperatures and is not easily deformed, and has excellent heat transfer capability. Ideal for high temperature printing. You can refer to the following description of the Plated Copper Nozzle. Plated Copper description (same principle as plated copper nozzle): These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used. Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control. This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can't handle. Trianglelab V6 Compatible Plated Copper Heat Block Cartridge Style

All Prices include GST. Message us if require a tax invoice.

A aftermarket Trianglelab replacement aluminium V6 heater block, suitable for cartridge-style temperature sensors.

What is Included:

• TL V6 Comptaible Heater Block (Max safe printing temperature 450c, block can withstand up to 500c)
  
• TL V6 Style Silicon Sock (Max 280c) -Sock may be Orange/Blue depending on batch

Remember to remove sock when printing above 280c, and ensure all other other hardware such as nozzle/heat break support those HOTEND Compatible with PT100

V6 HOTEND Compatible with Prusa I3 3D printer

Compatible with M6 threaded port third-party custom is resistant to high temperatures and is not easily deformed, and has excellent heat transfer capability. Ideal for high temperature printing. You can refer to the following description of the Plated Copper Nozzle. Plated Copper description (same principle as plated copper nozzle): These nozzles are engineered for ultimate high temperature performance.

Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.

In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be uséd.

Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control. This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can't handle.

HAVE A QUESTION OR CONCERN?

If you need more information regarding this item, please message us or check on original manfuacturers websites.

DREMC STORE back our products and pride ourselves, not only in quality but in genuine products. Please do not hesitate to reach out to us. We stock the largest range of 3D Printer Spares Parts, from Manufacturer such as E3D-Online, Creality, Slice Engineering, Bondtech, Micro Swiss, LDO Motors, Bigtreetech, Trianglelabs to name a few.

We are the largest Australia Creality Spare Part Distributors based in Brisbane, we stock over 200 SKUs Creality Printers spares parts. Our website store.dremc.com.au for latest stock list and accurate real time stock counter, no hidden stock levels.

Do you need bulk spare parts or DREMC / Polymaker filament discount? Message us now if you require B2B/Educational payment terms.

Please check out our response to see what others are saying about us.

× × × × ×
Buy now and save! Tell a friend Visit store Watch now Postage info

Click the Postage tab above the listing description for more info

Click the Postage tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYING VIA PAYPAL/CARD

Please refer to Checkout for available payment method.

Price include GST. Message us if require a tax invoice.

Additional Information

No additional information at this time

Ask seller a question

You might also like BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board for Ender 3 Series Ender 5 Titanium Alloy Bi-Metal Heatbreaker For ANYCUBIC Mega S / Mega Pro / Vyper Trianglelab CR6 SE Titanium alloy Bi-Metal Heat break For CR-6 SE Ender 3 Neo Genuine E3D - Hemera HeatBreak Heat Break (Stainless Steel or Titanium) Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© DREMC STORE

Postage

Click the Postage tab above the listing description for more info

Returns

Returns are accepted

Items must be returned within 30 days of the sale ending

Buyer will pay for return shipping.

integration by