 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector Uninterruptible Power Supplyfor Raspberry Pi
SAFETY CAUTIONS Features at a glance TheUPS HAT (E)is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface. Uninterruptible Power Supports 21700 large capacity Li battery,
Longer Battery Life Do not connect the recharger if the indicator lights up, otherwise the protection circuit will be broken down. Onbaord USB interfaces Supports Battery level display and
Selection guide Model Device Support Battery Support feature
UPS HAT (C) Raspberry Pi Zero 803040 Li-po battery 1000mAh 3.7V Provides power supply via Pogo pins
Li-ion Battery HAT 14500 Li-ion battery (NOT included) UPS not supported
UPS HAT (B) Raspberry Pi 5/4B/3B+ 18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery charger Provides power supply via Pogo pins, with 5V USB output
UPS HAT (E) 21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C port Provides power supply via Pogo pins, with 5V USB output
UPS HAT Raspberry Pi 4B/3B+ 18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery charger Provides power supply via pin header, with 5V USB output
UPS HAT (D) 21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery charger Provides power supply via Pogo pins, with 5V USB output
UPS Power Module Jetson Nano 18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery charger Provides power supply via 6PIN cable, with OLED screen
UPS Power Module (B) 18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery charger Provides power supply via Pogo pins
UPS Module 3S Suitable for the devices with Type-C power port 18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery charger Adapting various interfaces via cables
UPS Module Mini Suitable forCM4-IO-WIRELESS-BASE-Bbase board, etc. 10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A output Provides power supply via pads or pin header
Package Content
Weight:0.127 kg The 21700 batteries are NOT included 
|
|
