E3D Revo™ High-Temperature Hotside HT / UHT (24v) PT1000 500C and 400C High-Precision This uses a PT1000 thermistor capable of measuring high temperatures accurately. These Hotside kits allow Revo users to upgrade their set-ups to enable reliable printing at higher temperatures with materials such as PEEK or PEI. High temperature, abrasive resistance Nozzles. Much like ObXidian, HTX nozzles have a hardened steel tip and copper spreader segment to optimise the transmission of heat to the heatsink. This assembly is then coated with Chromium Nitride to provide abrasive resistance up to 500°C. Fully customisable. Configure your ideal high temperature HotEnd. Choose between a high precision heater cartridge (up to 400C) or high temperature heater cartridge (up to 500C). Rapid identification. HTX nozzles are grey in colour and have their sizes engraved into them with easy-to-read numbers, so there are no confusing identification markers to learn! Please Note: You may need to adjust your Z offset when changing nozzles. We do not recommend the use of abrasive materials with 0.25mm nozzles. The particle size, especially with fibres, can often be larger than 0.25mm, significantly increasing the risk of clogging the nozzle. Extension cables are not included. The revo extension cable kit can be used with chamber temperatures up to 80°C. If you require a higher operating temperature you will need to source the extension cables yourself. ⚠️ WARNING: This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Kit includes: Standalone Revo Hotside: 1 x HT block 1 x PT1000 sensor 1 x High precision (HT) or High Temperature (UHT) heater cartridge 1 x Revo spring Single Nozzle Revo Hotside 1 x HT block 1 x PT1000 sensor 1 x High precision (HT) or High Temperature (UHT) heater cartridge 1 x Revo spring 1 x Revo HTX 0.4mm nozzle Fully Loaded Revo Hotside 1 x HT block 1 x PT1000 sensor 1 x High precision (HT) or High Temperature (UHT) heater cartridge 1 x Revo spring 1 x Revo HTX 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles E3D Revo™ High-Temperature Hotside HT / UHT (24v) PT1000 500C and 400C High-Precision
This uses a PT1000 thermistor capable of measuring high temperatures accurately.
These Hotside kits allow Revo users to upgrade their set-ups to enable reliable printing at higher temperatures with materials such as PEEK or PEI.
High temperature, abrasive resistance Nozzles. Much like ObXidian, HTX nozzles have a hardened steel tip and copper spreader segment to optimise the transmission of heat to the heatsink. This assembly is then coated with Chromium Nitride to provide abrasive resistance up to 500°C.
Fully customisable. Configure your ideal high temperature HotEnd. Choose between a high precision heater cartridge (up to 400C) or high temperature heater cartridge (up to 500C).
Rapid identification. HTX nozzles are grey in colour and have their sizes engraved into them with easy-to-read numbers, so there are no confusing identification markers to learn!
Please Note:
You may need to adjust your Z offset when changing nozzles.
We do not recommend the use of abrasive materials with 0.25mm nozzles. The particle size, especially with fibres, can often be larger than 0.25mm, significantly increasing the risk of clogging the nozzle.
Extension cables are not included. The revo extension cable kit can be uséd with chamber temperatures up to 80°C. If you require a higher operating temperature you will need to source the extension cables yourself.
⚠️ WARNING: This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
Kit includes:
Standalone Revo Hotside:
1 x HT block
1 x PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
Single Nozzle Revo Hotside
1 x HT block
1 x PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HTX 0.4mm nozzle
Fully Loaded Revo Hotside
1 x HT block
1 x PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HTX 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles
× × ×
Shipping info
Click the Shipping & Payments tab above the listing description for more info
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
You might also like AMBROSIA Über ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS F AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Pre AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Prem Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© West3D Printing
Shipping & Payments
Click the Shipping & Payments tab above the listing description for more info
Payment
Accepted Payment Methods
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Seller will pay for return shipping.
integration by
