Elite Machined Ultralight X Beam with CNC XY Joints for Voron V2.4 and Trident with Titanium HardwareThese are available and in stock if listed as such. Use Gates Branded Idlers! We offer an addon option for ABEC7 Bearings and Genuine Gates idlers. Get your backers for this beam here! The Elite Ultralight X Beam with two piece interlocking XY Joints using precision shafts for the pulley and bearings (we recommend using our Berserker ABEC-9 bearings) for Voron V2.4 and Trident combines rigid CNC'd construction while maintaining a light profile (weighing approx. 134g for a 350 beam). A perfected design, the Elite Machined Ultralight X Beam by Common Anomaly Productions (portion of the sale has been paid to the designer to support his work) provides a lower profile while increasing stiffness and reducing thermal expansion over a standard 2020 extrusion. The design also helps to reduce the chances of damaging your belts over time from against your idler bearings. To add to the unparalleled features, these are absolutely stunning, anodized black with a highlighted Voron Design logo and accent chrome face. Unlike other lightweight beams on the market, these will NOT sag on you. These are designed to use 6mm belts and a 12mm (MGN12) rail, though people have used a 9mm successfully (12 is still recommended!) This kit comes with a set of hardware (Titanium as of 8/22) to install, the shoulder bolts may require some sanding during installation (these may be Ti (CA Vendor Share) or Stainless Steel (Misumi). More information about this product can be found on the githubs below: BeamXY Joints Elite Machined Ultralight X Beam with CNC XY Joints for Voron V2.4 and Trident with Titanium Hardware
These are available and in stock if listed as such.
Use Gates Branded Idlers! We offer an addon option for ABEC7 Bearings and Genuine Gates idlers.
Get your backers for this beam here!
The Elite Ultralight X Beam with two piece interlocking XY Joints using precision shafts for the pulley and bearings (we recommend using our Berserker ABEC-9 bearings) for Voron V2.4 and Trident combines rigid CNC'd construction while maintaining a light profile (weighing approx. 134g for a 350 beam).
A perfected design, the Elite Machined Ultralight X Beam by Common Anomaly Productions (portion of the sale has been paid to the designer to support his work) provides a lower profile while increasing stiffness and reducing thermal expansion over a standard 2020 extrusion. The design also helps to reduce the chances of damaging your belts over time from against your idler bearings.
To add to the unparalleled features, these are absolutely stunning, anodized black with a highlighted Voron Design logo and accent chrome face. Unlike other lightweight beams on the market, these will NOT sag on you.
These are designed to use 6mm belts and a 12mm (MGN12) rail, though people have uséd a 9mm successfully (12 is still recommended!)
This kit comes with a set of hardware (Titanium as of 8/22) to install, the shoulder bolts may require some sanding during installation (these may be Ti (CA Vendor Share) or Stainless Steel (Misumi).
More information about this product can be found on the githubs below:
BeamXY Joints
× × × × × × ×
Shipping info
Click the Shipping & Payments tab above the listing description for more info
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
You might also like AMBROSIA Über ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS F AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Pre AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Prem Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© West3D Printing
Shipping & Payments
Click the Shipping & Payments tab above the listing description for more info
Payment
Accepted Payment Methods
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Seller will pay for return shipping.
integration by
