UBB Store

External GOTEK adapter lead a500 600 1200 2000 4000 50cm / Drive * 23p Dsub
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
External GOTEK adapter lead a500 600 1200 2000 4000 50cm / Drive * 23p Dsub
Price: GB $34.96

Your Image Goes Here

Amiga External Disk Port all Amigas 50cm Floppy 34 pin lead for* Gotek Drive *

All Amigas 34 pin floppy cable & power

COMMODORE AMIGA 1200 & A600 A500 ETC

 

Tested on A500 KS 2 by Keif ( flash floppy Arthor ) Working

Tested on A600 KS 3.1

A1200 KS 3.1 Working. By me.

 

  • Brand new Approx 50cm high quality cable
  • External Disk port connection
  • Orginal 23p Dsub with 3D printed casing no cut 25p here.
Data ribbon cable and adapter to enable the plugging in for an external Gotek/OpenFlops usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers.Power for your Gotek/OpenFlops drive is also provided by this cable and adapter.Great for adding an External USB Gotek/OpenFlops floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!)Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end.This cable  "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need a boot selector to convert SEL0 and SEL1 signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.)
These are tested on an Amiga 1200 before despatch, which you can see in the photos. .
Note: Booting directly from a Gotek/OpenFlops external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!

 

We accept payment by any of the following methods:
PayPal

 

Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!



Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).


In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

High QualityFast ShippingAll Amigas 34 pin floppy cable & power COMMODORE AMIGA 1200 & A600 A500 ETC Tested on A500 KS 2 by Keif ( flash floppy Arthor ) Working Tested on A600 KS 3.1 A1200 KS 3.1 Working. By me. ---Brand new Approx 50cm high quality cable ---External Disk port connection ---Orginal 23p Dsub with 3D printed casing no cut 25p here. --- Data ribbon cable and adapter to enable the plugging in for an external Gotek/OpenFlops usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers. Power for your Gotek/OpenFlops drive is also provided by this cable and adapter. Great for adding an External USB Gotek/OpenFlops floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!) Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end. This cable "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need a boot selector to convert SEL0 and SEL1 signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.) These are tested on an Amiga 1200 before despatch, which you can see in the photos. . Note: Booting directly from a Gotek/OpenFlops external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!

Amiga External Disk Port all Amigas 50cm Floppy 34 pin lead for* Gotek Drive *

All Amigas 34 pin floppy cable & power

COMMODORE AMIGA 1200 & A600 A500 ETC

 

Tested on A500 KS 2 by Keif ( flash floppy Arthor ) Working

Tested on A600 KS 3.1

A1200 KS 3.1 Working. By me.

 

  • Brand new Approx 50cm high quality cable
  • External Disk port connection
  • Orginal 23p Dsub with 3D printed casing no cut 25p here.
Data ribbon cable and adapter to enable the plugging in for an external Gotek/OpenFlops usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers.Power for your Gotek/OpenFlops drive is also provided by this cable and adapter.Great for adding an External USB Gotek/OpenFlops floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!)Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end.This cable  "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need a boot selector to convert SEL0 and SEL1 signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.)
These are tested on an Amiga 1200 before despatch, which you can see in the photos. .
Note: Booting directly from a Gotek/OpenFlops external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!

 

We accept payment by any of the following methods:
PayPal

 

Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!



Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).


In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

High QualityFast Shipping

All Amigas 34 pin floppy cable & power

COMMODORE AMIGA 1200 & A600 A500 ETC

 

Tested on A500 KS 2 by Keif ( flash floppy Arthor ) Working

Tested on A600 KS 3.1

A1200 KS 3.1 Working. By me.

 

  • Brand new Approx 50cm high quality cable
  • External Disk port connection
  • Orginal 23p Dsub with 3D printed casing no cut 25p here.
Data ribbon cable and adapter to enable the plugging in for an external Gotek/OpenFlops usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers.Power for your Gotek/OpenFlops drive is also provided by this cable and adapter.Great for adding an External USB Gotek/OpenFlops floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!)Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end.This cable  "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need a boot selector to convert SEL0 and SEL1 signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.)
These are tested on an Amiga 1200 before despatch, which you can see in the photos. .
Note: Booting directly from a Gotek/OpenFlops external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!

 



Buy Now

Related Items