The Gateron Ink switches feature a transparent smokey housing. This switch is made out of a new type of plastic. The spring inside is coated black to match the switch housing. This switch is very smooth and has little spring crunch.
The upgraded housing that helps make the contact leaves more secure. Contact leaves are still able to be pressed out with your thumb, but do not fall out while turning the switches upside down in our testing.Specs:35 pack of switches in Gateron sealed boxLinear3.4mm travel50g actuation / 60g bottom outTransparent housing5 pinCustom Lubing and Filming Service:- Optional service to individually hand lube and film each switch.- If you need an exact # of switches for custom orders I can provide a refund at the prorated amount per switch.- We use Krytox 205g0, Krytox 105 and TriboSys 3203 depending of your switch type.- We use polycarbonate clear or poron black film depending on switch type.- Depending on order volume, custom orders can take 3 - 7 additional business days.
FAQ:Q: Why does the switch not fit in my keyboard? - A: This will most likely depend on the number of pins your keyboard supports. Switches either have 3 or 5 pins and if your keyboard supports only 3-pin, the 5-pin switch will not fit without a simple modification Why does my keyboard not register the key press after installing the switch? - A: You most likely bent a pin while installing the switch onto the keyboard. This is very common and all you need to do is remove the switch, straighten the pin out with pliers and install the switch