Primarily a surge tank to provide the expanding cool wet place and act when bleeding the system, ie at the initial filling, supportive. Here is where the innovations come from the engineers at Phobya used: An internal channel system helps vent to ensure all air bubbles from the disappearance of the water circulation and flow back to the pure coolant in the system. Even with very powerful pumps, the construction is such that no new air is drawn into the system! The filling of the expansion tank can be done traditionally, go out a bit, turn the black nickel-plated Phillips head screw from 3 / 8Zoll closure thread and then the easiest let the liquid by means of a funnel, run into it. An alternative and easier solution is to form a bond with a Fillport. So the expansion tank needs not touched and can be filled from outside the housing. The small details are what makes this major component of the water cooling so interesting! So open up 5x G1 / 4 connection thread many ways the hose with the reservoir into communication. Thus must the optical point of view not to give way to constructive, but to bring it in line!Optics is next constructiveness another very important consideration! Especially with larger housing has always way too much 5.25 inch drive bays. These are now Besides the practical component of the Verbauens of reservoirs used Phobya's Optical appreciation for, so generally most viewed page of the PC is upgraded. A second thin Plexi on the actual reservoir front protects the black middle plate by the word of the brand product "PHOBYA" was admitted. In addition, on the other hand, a level indicator is embedded to control, avoid running out of liquid in the tank and this will not be lost sight of. With colored liquid this beautiful effect and sets a unique accent. This can be improved even further by the 4x 5mm LED holes are fitted at the rear with its desired color LEDs which not only enhances the container, no, the entire front of her body!Supplied with all required parts will supplied for mounting. To attach the reservoir can simply be pushed into the front of the tower and is fastened with the black socket head screws. Because usually only 3 of the 5 port threads are used, 3 black screw plugs are included.Technical Details:Material: Acral / Plexi (PMMMA)Color: transparent, black frontDimensions (L x W x H): 176 x 149 x 88mmLed holes: 4x 5mmConnecting thread: 5x G1/4"Complies with Rohs directives!Scope of delivery:1x Reservoir3x G1/4" plugs4x 5mm mounting screw4x washers
This is a brand new factory sealed clearance item that is non-returnable. It has a 3 year manufacturer warranty.