SEAGATE ST336752LC HDD HARD DISK SCSI 36.4GB 80PIN 3.5” SERVER HARD DISK SEAGATE ST336752LC HDD HARD DISK SCSI 36.4GB 80PIN 3.5” SERVER HARD DISKReference: 10391
Simpletek code 10391
Grade A RefurbishedPossible presence of purely aesthetic defects, which do not affect use, such as small pixel defects (ISO-9241-3xx standards), microscratches on the body/screen and/or other defects not visible more than 30cm from the object resulting in any case from wear of the object over time; the hardware is however tested, working and guaranteed (see product condition details)
General informations
Capacity: 36.4GB
Form Factor: 3.5"
Warranty: 12 months (Simpletek)
Purchase invoice: must be requested at the same time as the order and will be sent via email. In the absence of billing data, a receipt will be issued which cannot be capacity (GB): 47.5
Formatted capacity (GB): 36.7
Average number of sectors per track: 484
Type of actuator: Rotary voice coil
Traces: 147,976
Cylinders: 18,497
Physical heads: 8
Discs (3.0-inch): 4
Media type: Thin Film/GMR
Registration method: PRML 16/17 EPR4
Internal transfer rate (Mbit/s): From 548 to 706
Internal formatted transfer rate (MB/s): From 51.8 to 68.1
External Transfer Rate (MB/s): 40 Sync
Low Voltage Differential (LVD): 80/160 Sync
Rotational speed (RPM): 15,000
Average Latency (msec): 2.0
Buffer: 8MB
Interface: Ultra-SCSI Wide
Low Voltage Differential (LVD): Ultra3-SCSI Wide
ASA II, SCAM level 2 (1 default)
Bytes per track: 316,155
Sectors by unit: 71,687,369
TPI (Traces Per Inch): 38,000
BPI (Peak kbits per inch): 482
Average access (ms read/write): 3.6/4.2
Single track search (ms read/write): 0.4/0.8
Maximum full search (ms read/write): 7.0/8.0
MTBF (hours on): 1,200,000
Shock (G's, 11/2/.5 ms):
Operational (Read/Write): 15
Abnormal: 40
Non-operational: 75/250/100
Acoustics (typical Bels, sound power): 3.7
Power dissipation (watts/BTU) active:
Inactive: 12.3/42.0
Power requirements:
+12V Start (amps): 1.44
+12V Typical (amps): 0.51 idle
+5V Start (amps): 0.90
+5V Typical (amps): 0.83 idle
Landing zone (cylinders): AUTOMATIC PARK
IBM AT drive type: 0 or NONE
Physicist:
Height (inch/mm): 1.0/25.4
Width (inch/mm): 4.00/101.6
Depth (inch/mm): 5.75/146
Weight (lbs/kg): 1.5/0.68
Contact us, click here
SEAGATE ST336752LC HDD HARD DISK SCSI 36.4GB 80PIN 3.5” SERVER HARD DISK SEAGATE ST336752LC HDD HARD DISK SCSI 36.4GB 80PIN 3.5” SERVER HARD DISK Possible presence of purely aesthetic defects, which do not affect use, such as small pixel defects (ISO-9241-3xx standards), microscratches on the body/screen and/or other defects not visible more than 30cm from the object resulting in any case from wear of the object over time; the hardware is however tested, working and guaranteed (see product condition details)
Purchase invoice: must be requested at the same time as the order and will be sent via email. In the absence of billing data, a receipt will be issued which cannot be cancelled. Internal transfer rate (Mbit/s): From 548 to 706 Internal formatted transfer rate (MB/s): From 51.8 to 68.
