DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home OtherHot Item eSUN PLA+ PLA Matte PETG ABS+ PLA Pro Lite Filament 1.75mm 1KG For 3D Printer USD 22.99 eSUN ABS ABS+ Plus Filament High Strength Toughness 1.75mm 1KG for 3D Printer USD 21.99 eSUN ABS ABS+ Plus Filament 1.75mm 1KG Accuracy Printing Filaments fr 3D Printer USD 23.99 eSUN Super Enhanced Carbon Fiber Filled Nylon Filament PA12 CF for 3D Printers USD 99.99 eSUN 3D Printer PLA+ PLA PLUS Pro Filament 1.75mm 1KG Environmentally Friendly USD 21.99 Picture
New List Item eSUN ABS ABS+ Plus Filament High Strength Toughness 1.75mm 1KG for 3D Printer USD 21.99 eSUN PLA+ PLA Matte PETG ABS+ PLA Pro Lite Filament 1.75mm 1KG For 3D Printer USD 22.99 eSUN Super Enhanced Carbon Fiber Filled Nylon Filament PA12 CF for 3D Printers USD 99.99 eSUN 3D Printer PLA+ PLA PLUS Pro Filament 1.75mm 1KG Environmentally Friendly USD 21.99 eSUN ABS ABS+ Plus Filament 1.75mm 1KG Accuracy Printing Filaments fr 3D Printer USD 23.99 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us eSun ABS+ Filament 1.75mm 1KG Accuracy Plastic Printing Filament for 3D Printer
is improved and upgraded based on ABS, cracking and warping has been significantly improved. High Strength. Better Toughness. Heat Resistance. Wear Resistance. Excellent Impact Strength. Compatible with Most of 3D Printers.
2.Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
3.Total Length: 410-425m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
4.Printing Temp. at 220-260℃ can give you a smooth prints which require less calibration and give off fewer extruder issues. Use With Heated Build Platform Is Print Temp（℃） 220-260 Bed Temp（℃） 90-110 Density(g/cm³) 1.04 Heat Distortion Temp(℃,0.45MPa) 78 Melt Flow Index(g/10min) 12(220℃/10kg) Tensile Strength(MPa) 43 Elongation at Break(%) 22 Flexural Strength(MPa) 66 Flexural Modulus(MPa) 2348 IZOD Impact Strength(kJ/m³)
19
Package Contents:
1KG ABS+
Item SpecificsColor :Gray/Blue/Red/SilverFilament Diameter :1.75 mmBrand :ESUNType :FilamentCompatible Model :For ALL FDM 3D PrinterCompatible Model :For ALL FDM 3D Printer
PaymentShippingReturnsContact Us
We accept PayPal payment ONLY. Payment is required within 4days. Item(s) will be shipped immediately within 1-3 business day of receiving full payment. Shipping directions left in PayPal Notes will NOT be considered. Please contact us directly if you have a special request.
Shipping Day are Monday to Friday, excluding Saturday, Sunday and Holiday declared by the carrier. Your order will be ship out within 1-3business days.
Please ensure your shipping address is correct before ordering. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
1.We offer 30 days return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product and would like to return.
2.All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your ID.
3.We will refund YOUR FULL WINNING offer AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement
4.Buyer is responsible for return shipping cost.
All messages will be replied within 24 hours or sooner during working days.
Your satisfaction is our priority. If you have any questions about the products, please feel no hesitation to contact us, we will try our best to solve them.
Looking forward to your messages!
All rights reserved.
