• √ 【HIGH-PERFORMANCE】10 Blades 12V 80W 12 Inch radiator engine cooling fan with mount brackets and tie straps kit.Maximum Fan CFM=800 CFM, Maximum Fan RPM=2000±10% RPM.Overall Diameter (in): 12.44''.Thickness (in): 2.36''.Amp Draw: ≤7.5 amp.
• √【DESIGN】Slim design provides excellent engine bay clearance.Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator cooling fan is reversible. It can be used as a puller.
• 【WIDE USE】Universal radiator cooling fan fit various vehicles and engines. It depends on the size of your radiator. Auxiliary equipment for cooling the entire engine compartment, including radiators, air conditioning systems, intercoolers, oil systems, and transmissions.
• 【SERVICE GUARANTEE】A customer said that the fan was not available. We put the instructions on the main picture for reference. Thank you. You can contact us if you have any questions.

Product Description SPECIFICATION AND FITMENT Fitment

• It's a universal fit cooling fan.Make sure the fan size is correct with your original

How to choose the right fan size？

Step 1:Confirm the width and depth of your radiator

Step 2:Compare the fan diameter and depth with radiator

Step 3: Choose the right size fan

Universal Slim Fan Push Pull Electric Radiator Cooling Mount Kit

This is a great electric fan fits for radiators, oil coolers, transmission coolers, condensers and more. These powerful electric fans work with 12-volt electrical systems and draw 6 to 10 amps, depending on the size. We have size 7", 10", 12", 14", 16", and different colors to choose from.

7" Fan Maximum CFM: 800 CFM

10" Fan Maximum CFM: 800 CFM

12" Fan Maximum CFM: 800 CFM

14 " Fan Maximum CFM: 900 CFM

16 " Fan Maximum CFM: 1000 CFM

Puller Fans & Pusher Fans

• Puller fans mount on the engine back side of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out of the back side of the radiator.
• Pusher fans mount on the front grille side of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core and exits out the back side of the radiator.

Function Of Electric Fan

• Keep the engine cool. It can also preheat and cool faster, extend the service life of water pump, reduce fan noise, improve air conditioning performance, and increase gasoline mileage.

Fan Mounting Kit

4 Mounting Rods

4 Mounting Clips

4 1x1 Foam Pads

4 Mounting Feet

4 Mounting Spring

WIDE USE

Universal radiator cooling fan fit various vehicles and engines. It depends on the size of your radiator. Auxiliary equipment for cooling the entire engine compartment, including radiators, air

Puller Fans & Pusher Fans

Function Of Electric Fan

Fan Mounting Kit

Wide use

Installation:

• Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly.
• Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.
• Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners.
• Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.
• Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed.

Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.2 out of 5 stars 939 4.2 out of 5 stars 939 4.2 out of 5 stars 939 4.2 out of 5 stars 939 Price $31.99$31.99 $34.99$34.99 $37.99$37.99 $49.99$49.99 Size 10 Inch 12 Inch 14 Inch 16 Inch Volt 12V 12V 12V 12V Watt 80W 80W 90W 120W Maximum Fan RPM 2400±10% 2000±10% 2000±10% 2000±10% Maximum Fan CFM 800 800 900 1000