12ft Slim Cat6 28AWG Ethernet Patch Cable, Bare Copper UTP, Snagless RJ45, White
The Slim Cat6 28AWG UTP patch cable connects RJ45 devices with a cable about 60% thinner than a standard Cat6 cord. At roughly 3.6 mm in diameter, it is built for high-density patch panels and racks where space and airflow are tight, and for desks and home setups where a thinner, more flexible cord routes cleanly behind equipment.
Both ends terminate in an 8P8C RJ45 modular plug wired to the T568B standard, with 50-micron gold-plated contacts that resist corrosion and keep contact resistance low. The plug seats in any standard RJ45 port on switches, routers, patch panels, gaming consoles, and smart TVs, so the cable drops straight into existing network infrastructure.
The slim profile is the defining feature. A thinner jacket over four twisted pairs of 28 AWG bare copper reduces cable bulk in bundles, improves airflow across stacked rack gear, and gives a tighter bend radius for routing behind desks and AV racks. Because 28 AWG has higher resistance than 24 AWG, these cables are intended for shorter patch runs rather than long horizontal links.
The cable carries UL and RoHS marks. It supports Gigabit Ethernet across standard patch lengths and up to 10 Gbps over short runs, and the bare copper conductors carry PoE to access points and cameras on short connections without a separate power cable.
A translucent snagless molded boot protects the locking tab so the slim connector slides through crowded patch fields and cable bundles during moves, adds, and changes. Ten jacket colors, including pink, support structured color-coding for port mapping, while the low-profile design keeps dense racks and desk areas tidy and serviceable.
The white jacket keeps cabling discreet against light-colored walls and desks and is often used to mark specific zones or workstations in structured & Ordering Information: This slim Cat6 patch cable works with any RJ45 equipment, including network switches, routers, patch panels, PoE devices, gaming consoles, and smart TVs, and is backward compatible with Cat5e gear. It is available in lengths from 0.5 ft to 50 ft and in ten colors. For long horizontal or backbone runs, use a standard 24 AWG Cat6 or Cat6a cable; for shielded environments, see the Cat6a STP patch cable.
Product Comparison: Slim 28AWG vs Standard 24AWG Cat6 Patch Cable
Buyers choosing a Cat6 patch cable often weigh the slim 28AWG version against a standard 24AWG cord, since both use RJ45 connectors and support Gigabit Ethernet. The table below summarizes the decision:
Attribute Slim Cat6 28AWG (this cable) Standard Cat6 24AWG Cable Diameter About 3.6 mm (roughly 60% thinner) About 5.5-6 mm Conductor 28 AWG stranded bare copper 24 AWG stranded bare copper Bandwidth 250 MHz (Cat6) 250 MHz (Cat6) Recommended Length Short patch runs (about 25-50 ft) Full-length runs, including long horizontal links PoE Supported on short runs; thinner gauge runs warmer More thermal headroom for high-power PoE Airflow & Density Better airflow and easier management in dense racks Bulkier in high-density patch fields Best Use High-density patch panels, racks, desks, AV setups Backbone, long horizontal runs, in-wall cabling Connector RJ45 (8P8C), 50-micron gold contacts, snagless boot RJ45 (8P8C), 50-micron gold contacts, snagless boot
Choose slim 28AWG for high-density racks, better airflow, and tidy short runs behind desks and AV gear.
Choose standard 24AWG for long horizontal runs, high-power PoE, and permanent structured cabling.
FAQ
What is the difference between slim 28AWG and standard 24AWG Cat6?
Slim 28AWG Cat6 is about 60% thinner, which improves airflow and cable management in dense racks and behind desks. Standard 24AWG Cat6 is thicker with lower resistance, so it is better for long horizontal runs. Both use RJ45 connectors and support Gigabit Ethernet.
Does this slim Cat6 support PoE, PoE+, and PoE++?
Yes. The bare copper conductors carry Power over Ethernet and the RJ45 plugs fit any standard port. Because the slim cable is 28 AWG, it runs warmer than 24 AWG on long high-power PoE, so it is best for short PoE runs; for long high-power runs use a standard 24 AWG cable. Bare copper matters here, since copper-clad aluminum overheats under PoE.
How long can a 28AWG slim patch cable run?
Slim 28AWG cables are designed for short patch connections, typically up to about 25 to 50 feet. Their thinner conductors have higher resistance than 24AWG, so for long horizontal links between rooms or floors a standard 24AWG cable is the better choice.
How do I install a snagless slim patch cable?
Push the RJ45 plug into the port until the locking tab clicks; the snagless boot lets the slim connector pass cleanly through dense patch fields and bundles. To remove, press the tab and pull straight out. No tools are needed since the cable is factory-terminated and tested.
Which Cat6 cable is best for a high-density rack or behind a desk?
For dense patch panels, stacked rack gear, and tidy desk routing, slim 28AWG Cat6 is best because it saves space and improves airflow. For long runs or permanent in-wall cabling, choose standard 24AWG Cat6 or Cat6a solid bulk cable instead.
