16MB USB-C Type-C RP2040 Development Board for RPI Raspberry Pi PICO ,NOT Zero W
PACKAGE CONTENT:
RP2040-PiZero x1
Wiki English manual : Development Board
Based On Raspberry Pi RP2040
Onboard DVI Interface, TF Card Slot And PIO-USB Port
Board Specifications
RP2040-PiZerois a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into the products.
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 16MB of onboard Flash memory
Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
Supports using as a USB host or slave via onboard PIO-USB port
Onboard TF card slot for reading and writing TF card
Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
USB 1.1 with device and host support
Drag-and-drop programming using mass storage over USB
Low-power sleep and dormant modes
2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support
Integrates Multiple Interfaces
Onboard DVI Interface, PIO-USB Port And TF Card Slot For More Possibilities
for reference only, the1.3inch LCD HATand7inch HDMI LCD (H)are Not included
Support C/C++, MicroPython, Arduino
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
* the DVI and PIO-USB functions are only supported in C environment and cannot be used at the same time
Dual-Core ARM Processor
Dual-Core ARM Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
What's On Board
USB Type-C connector for communication and program burning
PIO-USB port for using as USB host or slave via PIO
DVI interace (Mini HDMI connector) for driving DVI screen with HDMI cable
TF card slot SPI interface communication
RP2040 dual-core processor, up to 133MHz operating frequency
W25Q128JV 16MB NOR-Flash
RUN button reset button
BOOT button Press it when resetting to enter download mode
Lithium Battery Header PH2.0 header, for connecting 3.7V Lithium battery, allows recharging/discharging the battery
40PIN GPIO Header Compatible with some Raspberry Pi HATs
Product Show
Outline Dimensions
![Buy Now Buy Now](buy.gif)