Description:
This quadrascopic camera bundle incorporates four 16MP IMX519 autofocus cameras, and the cutting-edge MIPI stereo camera breakthrough from – The Camarray HAT. As the upgraded version of Synched Stereo Camera HAT, the Camarray further pushes the multi-camera limits and doubles the interfacing capabilities to allow 4 synchronized MIPI camera modules to be interfaced to a single MIPI CSI-2 slot on prevailing single-board computers like Raspberry Pi, Jetson Nano, and Jetson Xavier NX. Also, as the Camarray HAT releases, starts to support a variable baseline for stereo camera applications with some modified camera modules, such as those IMX519 ones included in this bundle. Since no shared camera board or clock-sharing soldering is required for the image sensors, you can kick off your prototyping for stereo camera applications and then decide the optimal baseline. This camera can only get four images. also accepts subsequent customizations for your stereo camera applications.
Specfication & Comparison Chart
Sensor: Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534) Output: RAW10/8, COMP8 Lens: Autofocus; f/1.75; EFL: 4.28; FoV: 80°; Focus Range: 10 cm ~ infinite IR cut Filter: Integrated Tripod mount: 1/4”-20 Enclosure: ABS, also compatible w/ camera module v1 & v2
Packing List:
4 × IMX519 Camera Module 1 × UC-512 Camarray HAT 4 × 30cm 15-22pin Camera Cable 1 × 7cm 15-22pin Camera Cable 1 × Screw Pack
Designed for Raspberry Pi Camera: This Quad-Camera kit allows you to connect four 16MP IMX519 for Raspberry Pi cameras to a single standard pi board and capture images or video at the same time. (Note: Tripod is not included)
● Four in One: Combine four cameras into one frame, each with a max resolution of 1/4(2288(H)x1736(V); the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera.
Wide compatibility: It is compatible with the latest Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions for Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras. Note：This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware.
Please note: The cameras in the set are specifically designed to share clocks with the HAT for frame-level synchronization; however, they cannot be used as standard camera modules on their own. ABS Case for raspberry pi camera: B09TNG4V55/B09TKYXZFG.