QUIET YOUR SUPERMICRO SERVER — MORE AIRFLOW, A FRACTION OF THE NOISEThis front bezel mounts three 140mm fans to the face of your Supermicro CSE-846, CSE-847, or CSE-848 chassis. With quiet, high-static-pressure 140s pushing air through the front, you can turn the screaming stock 80mm fans way down, or drop them entirely if you're running an internal 3x120mm fan wall. Printed to order in the color of your choice.FITS
CSE-846, CSE-847 and CSE-848 (4U). Does NOT fit the CSE-826, CSE-836, or CSE-216.WHAT'S INCLUDED3D printed front fan bezel in your choice of color
Three black 140mm wire fan grills
12 screws for the grills
M5 socket head bolts and cage nuts for mountingWHAT YOU SUPPLYThree 140mm fans — 25mm thickness sits flush, other thicknesses work but won't sit as flush
Screws to attach the fans to the bezel (most fans include these)
Fan power — a 3- or 4-way splitter to a motherboard header, or an external controller such as the Noctua NA-FC1 or NV-PS1MOUNTING
Attaches with the included M5 bolts and cage nuts, or bolts directly to Supermicro sliding rails if you have them.CABLE ROUTING
Eight pass-through holes, two in each corner, for flexible external routing (see photos). If you'd rather keep cables hidden, you can run them internally through an unused drive bay and a hole in the backplane. I use the bottom-right bay with a 4-pin extension into a 3-way splitter on my own build.BEFORE YOU ORDER
Check that your fan header can handle the combined amp draw of all three fans. Most headers top out around 1A. If your fans exceed that, power them externally instead, a $20 fix that beats a fried header.COLORS
Black, Blue, Brown, Gray, Green, Orange, Pink, Purple, Red, White, Yellow. Message me for anything else and I'll tell you what I have on hand.MATERIAL
Printed in PLA as the front won't see much temperature, been using mine for over a year with no issues.Made to order. Please allow 1-3 business days before shipping.Not affiliated with or endorsed by Supermicro. Chassis and fans not included.