OnDec 9,2022, After 40 Years in the computer business, I retired.

Thisitem is one that I did not get sold before I closed.

AT-2746FX 100Mbps Fast Ethernet dualfiber 10FL and 100FX interface card Choice and Flexibility AlliedTelesis’ AT-2746FX is the answer for those fiber interface cardsthat support Wake-on-LAN (WoL) for either PCI 2.1 or PCI 2.2 systemsbut not both.Allied Telesis’ NICs support WoL through the PCI 2.2bus and support PCI 2.1 WoL via external cables. Resistant to signaldegradation, snooping, and interference, the AT-2746FX is the idealsolution for networks requiring protection from electricalinterference and hackers.The small footprint—together with thelow-profile option of the AT-2746FX—make these products a perfectchoice for PCs equipped with small desktop solutions. AdvancedManageability Allied Telesis’ AT-2746FX features a full-line ofcard assistant software: • AT-Setup reduces Window Driverinstallation to a mouse click.This Windows program guides usersthrough driver installation, updates, and problem corrections. •AT-Stat is an advanced Windows application that reports networkconditions and performance such as hardware resources, networkstatistics, and configuration. • The VLAN protocol driver allowsnetwork administrators to configure their VLAN network fabric at thePC instead of the switch, enabling transparent movement of systemsbetween switches. • TCP/IP checksum off-loading improves CPU use byverifying TCP/IP traffic checksums at the interface card rather thanat the host processor, improving overall system performance forslower PCs. • Packet prioritization enables Windows applicationswith Class of Service capabilities to prioritize out-bound packetstreams to these NICs, a useful feature for video streaming and VoIPwhere interruptions are unacceptable. • The AT-2746FX’s onboardManaged Boot Agent (MBA) provides a wide set of industrystandard bootprotocols, including PXE, NetWare NCP/IPX, IBM’s RPL, traditionalDHCP,and BOOTP,supporting both BBS (BIOS Boot Specification) andnon-BBS compliant PCs. It also includes an extensive set of utilitiesfor boot ROM configuration, as well as access to pre-OS and networkboot image files. • Offering a wide range of connector choices—ST or SC—these cards meet the requirements of most fiberinstallations.

Specifications Management Features WMIACPI 2.0/wOI PXE 2.1 Boot ROM Bus Type PCI 2.2 Ethernet StandardsIEEE 802.1p Quality of Service IEEE 802.1Q VLANs IEEE 802.2 LLC IEEE802.3ac MAC IEEE 802.3 10 Ethernet IEEE 802.3u Fast Ethernet DriversSupported Windows 7 Windows Vista Windows Vista 64-bit Windows XPWindows XP 64-bit Windows 2003 Windows 2003 64-bit Windows 2000 NDIS2NetWare 6.x Linux 2.4 Linux 2.6 Available Windows NT 4 Solaris x86Solaris Sparc 32-bit Solaris Sparc 64-bit NetWare 5.x Compliance RoHSUL FCC/EN55022 Class B TUV EN55024 CE C-TICK VCCI Connectors SC STMT-RJ RJ-45 100FX Optical receive sensitivity (max)-31dBm Transmitoptical power (min/max)-19/-14dBm 10FL Optical receive sensitivity(max)-34.4dBm Transmit optical power (min/max)-18.8/-13.8dBmEnvironmental Specifications Operating temperature 0°C to 50°CStorage temperature-25°C to 70°C Relative humidity 5% to 90%non-condensing Power Power consumption 5 Watts (max) Signalingvoltage 3.3/5V Status Indicators 10 ON 10Mbps link up GreenFull-duplex mode Yellow Half-duplex mode Blink Activity OFF 10Mbpslink down 100 ON 100Mbps link up Green Full-duplex mode YellowHalf-duplex mode Blink Activity OFF 100Mbps link down PhysicalCharacteristics Dimensions 17.5cm x 8.4cm (W x H) (6.9”) x (3.3”)Network Type 10FL,100FX Network Controller AMD AM79C976

This is the info directly from the manufactures website.

Fiber Optic Transition Card, PCI Port, Allied Telesys AT-2746FX.

Purchased from Micron Computer from their spare parts depots, and Never installed in any computer.

Thanks for looking