CC2340 Bluetooth-compatible Digital Transmission Module BLE5.3 Serial Port Pass-through Slave Mode Support Secondary high performance low power consumption.
UART interface, BLE5.3, high speed transmission 1Mbps,
low power consumption 5.3 serial port through the transmission,
power can be communicated, without complex development and setup.
Self-developed low-power algorithm logic, no fear of power supply problems.
AT command configuration or APP remote configuration parameters.
Chip built-in ARM-M10+ high performance processor.
512KB FLASH and 36 KB RAM chip IO have been externally referenced to support
the secondary development of the module firmware, applicable to more flexible.
Compatible with a variety of physical layer and communication protocols,
support for Zigbee 3.0, BLE5.3, Proprietary systems,
Simplelink-compatible TI 15.4 stack (2.4GHz), expanding more application range: 1.7V-3.8V
Standard voltage: 3.3V
Frequency range: 2402MHz to 2480MHz programmable configuration
Frequency Error: +/-10ppm
Modulation mode: GFSK
Data transfer rate: 1Mbps
Transmission distance: 150m (in open environment)
Output power: 0dBm (default 0)
Receiving sensitivity: -99dBm
Sleep current: <1uA
Receiving current: 2.43mA
Transmit current: 8.3mA@0dBm
Operating Temperature: -30℃-85℃
Size: 18.8*15.1mm
Antenna impedance: 50ohm
Antenna interface: PCB on-board
![Buy Now Buy Now](buy.gif)