TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that WAS PULLED FROM A WORKING ENVIRONMENT and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO ASR1001 ENTERPRISE 4-PORT GIGABIT IOS XE 1RU AGGREGATION SERVICES ROUTER (ADVENTERPRISE LICENSE)
• (2) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:Initializing Hardware ...
Calculating the ROMMON CRC ... CRC is correct
System Bootstrap, Version 15.0(1r)S, RELEASE SOFTWARE
Copyright (c) 1994-2010 by cisco Systems, Inc.
Current image running: Boot ROM1
Last reset cause: LocalSoft
ASR1000-1RU platform with 4194304 Kbytes of main memory
File size is 0x176a9d2c
Located />Image size 392863020 inode num 14, bks cnt 95914 blk size 8*512
Boot image size = 392863020 (0x176a9d2c) bytes
Package header rev 0 structure detected
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
calculated /> expected />Image validated
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): Chasfs initialisation took: 20 sec
onds, expected max time 10 seconds
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1
5.3(1)S1, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 08-Feb-13 10:26 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
% failed to initialize nvram
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
Warning: the compile-time code checksum does not appear to be present.
cisco ASR1001 (1RU) processor with 1141078K/6147K bytes of memory.
Processor board ID SSI16470BG5
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7741439K bytes of eUSB flash at bootflash:.
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: n
Press RETURN to get started!
*Jan 1 00:07:47.193: Module nam
e = asr1001 Next reboot level = adventerprise and License = adventerprise
*Jan 1 00:07:48.903: %IOSXE_THROUGHPUT-6-LEVEL: Throughput level has been set t
o 2500000 kbps
*Jan 1 00:07:50.910: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM conte
nts failed
*Jan 1 00:07:57.147: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Jan 1 00:07:58.746: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Jan 1 00:07:58.746: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Jan 1 00:07:58.748: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0
, changed state to up
*Jan 1 00:07:58.748: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0,
changed state to up
*Jan 1 00:07:58.748: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to down
*Jan 1 00:07:58.761: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Jan 1 00:07:59.626: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-
intf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Jan 1 00:07:59.777: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, ch
anged state to up
*Jan 1 00:07:59.777: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, cha
nged state to up
*Jan 1 00:07:59.777: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to down
*Jan 1 00:07:59.777: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, cha
nged state to up
*Jan 1 00:07:59.804: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been
loaded from the Shell Manager
*Jan 1 00:07:52.367: %CMLIB-6-THROUGHPUT_VALUE: F0: cmand: Throughput license
found, throughput set to 36000000 kbps
*Jan 1 00:07:54.067: %CPPHA-7-START: F0: cpp_ha: CPP 0 preparing image /tmp/sw
*Jan 1 00:07:54.330: %CPPHA-7-START: F0: cpp_ha: CPP 0 startup init image /tmp
*Jan 1 00:07:59.005: %CPPHA-7-START: F0: cpp_ha: CPP 0 running init image /tmp
*Jan 1 00:08:04.257: %IOSXE-5-PLATFORM: SIP0: xinetd[12002]: xinetd Version 2.3
.14 started with no options compiled in.
*Jan 1 00:08:04.257: %IOSXE-5-PLATFORM: SIP0: xinetd[12002]: Started working: 1
available service
*Jan 1 00:08:04.259: %IOSXE-5-PLATFORM: SIP0: xinetd[12003]: xinetd Version 2.3
.14 started with no options compiled in.
*Jan 1 00:08:04.259: %IOSXE-5-PLATFORM: SIP0: xinetd[12003]: Started working: 3
available services
*Jan 1 00:10:55.083: %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed s
tate to administratively down
*Jan 1 00:10:55.084: %LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed s
tate to administratively down
*Jan 1 00:10:55.084: %LINK-5-CHANGED: Interface GigabitEthernet0/0/2, changed s
tate to administratively down
*Jan 1 00:10:55.084: %LINK-5-CHANGED: Interface GigabitEthernet0/0/3, changed s
tate to administratively down
*Jan 1 00:10:55.085: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state
to administratively down
*Jan 1 00:10:56.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/0, changed state to down
*Jan 1 00:10:56.084: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/1, changed state to down
*Jan 1 00:10:56.084: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/2, changed state to down
*Jan 1 00:10:56.085: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/3, changed state to down
*Jan 1 00:10:59.292: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, interfa
ces disabled
*Jan 1 00:10:59.296: %SPA_OIR-6-OFFLINECARD: SPA (ASR1001) offline in subslot 0
/0
*Jan 1 00:10:59.300: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Jan 1 00:10:59.300: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Jan 1 00:10:59.333: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Jan 1 00:10:59.333: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Jan 1 00:10:59.348: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 0/0
*Jan 1 00:10:59.425: %SYS-5-RESTART: System restarted --
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1
5.3(1)S1, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 08-Feb-13 10:26 by mcpre
*Jan 1 00:10:59.539: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jan 1 00:10:59.539: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jan 1 00:11:01.379: %SPA_OIR-6-ONLINECARD: SPA (ASR1001) online in subslot 0/0
*Jan 1 00:11:01.719: %SYS-6-BOOTTIME: Time taken to reboot after reload = 370
seconds
Router>show ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1
5.3(1)S1, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 08-Feb-13 10:26 by mcpre
IOS XE Version: 03.08.01.S
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 3 minutes
Uptime for this control processor is 4 minutes
System returned to ROM by reload
System image file is />Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
License Level: adventerprise
License Type: Permanent
Next reload license Level: adventerprise
cisco ASR1001 (1RU) processor with 1141078K/6147K bytes of memory.
Processor board ID SSI16470BG5
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7741439K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
Router> Please Click Here to Visit Our StoreSearchBy37 - 278988 | Loc: E14 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: L FREESHIP - 20LBS |22.00"x22.00"x5.00"36.00lbs |Start: $0.00 | BIN: $139.99 | |2026-08-05 ||51268
