UBB Store

Cisco Catalyst WS-C3560X-24T-E 24Port Managed Switch w/C3KX-NM-1G Network Module
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cisco Catalyst WS-C3560X-24T-E 24Port Managed Switch w/C3KX-NM-1G Network Module
Price: US $89.99

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.

COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO CATALYST WS-C3560X-24T-E V06 24-PORT ETHERNET SWITCH W/C3KX-NM-1G MODULE
• (1) - POWER CORD

REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:File />in" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE5,
RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 18:32 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000

Initializing flashfs...
Using driver version 1 for media type 2
mifs[3]: 10 files, 1 directories
mifs[3]: Total bytes : 2097152
mifs[3]: Bytes used : 612352
mifs[3]: Bytes available : 1484800
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.

mifs[4]: 0 files, 1 directories
mifs[4]: Total bytes : 4194304
mifs[4]: Bytes used : 1024
mifs[4]: Bytes available : 4193280
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.

mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 524288
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 515072
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.

mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 524288
mifs[6]: Bytes used : 9216
mifs[6]: Bytes available : 515072
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.

mifs[7]: 489 files, 11 directories
mifs[7]: Total bytes : 57671680
mifs[7]: Bytes used : 19658240
mifs[7]: Bytes available : 38013440
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete.

...done Initializing flashfs.

Checking for Bootloader upgrade.. not needed

LANBASE Init...

POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: MA BIST : Begin
POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed

POST: SF ASIC BIST : Begin
POST: SF ASIC BIST : End, Status Passed

SmartChip Authentication Failed

POST: Switch Fabric Memory Tests : Begin
POST: Switch Fabric Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

extracting front_end/front_end_ucode_info (309 bytes)
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed

Waiting for Port download...Complete


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3560X-24 (PowerPC405) processor (revision A0) with 262144K bytes of me
mory.
Processor board ID FDO1650X306
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
28 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : F8:C2:88:24:BD:00
Motherboard assembly number : 73-12554-11
Motherboard serial number : FDO18220BFZ
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3560X-24T-E
Daughterboard assembly number : 800-32786-02
Daughterboard serial number : FDO182204FZ
System serial number : FDO1650X306
Top Assembly Part Number : 800-31331-09
Top Assembly Revision Number : B0
Version ID : V06
CLEI Code Number : CMMPW00DRA
Hardware Board Revision Number : 0x05


Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 30 WS-C3560X-24 12.2(55)SE5 C3560E-UNIVERSALK9-M




Press RETURN to get started!


*Mar 1 00:00:04.563: Read env variable - LICENSE_BOOT_LEVEL =
*Mar 1 00:00:06.492: Module nam
e = c3560x Next reboot level = lanbase and License = No valid license found
*Mar 1 00:00:15.435: %ILET-1-AUTHENTICATION_FAIL: This Switch may not have been
manufactured by Cisco or with Cisco's authorization. This product may contain
software that was copied in violation of Cisco's license terms. If your use of
this product is the cause of a support issue, Cisco may deny operation of the pr
oduct, support under your warranty or under a Cisco technical support program su
ch as Smartnet. Please contact Cisco's Technical Assistance Center for more inf
ormation.
*Mar 1 00:00:53.376: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to down
*Mar 1 00:00:54.945: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Mar 1 00:00:58.770: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 1 inserted
*Mar 1 00:00:58.770: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 inserted
*Mar 1 00:01:06.773: %ILET-1-AUTHENTICATION_FAIL: This Switch may not have been
manufactured by Cisco or with Cisco's authorization. This product may contain
software that was copied in violation of Cisco's license terms. If your use of
this product is the cause of a support issue, Cisco may deny operation of the pr
oduct, support under your warranty or under a Cisco technical support program su
ch as Smartnet. Please contact Cisco's Technical Assistance Center for more inf
ormation.
*Mar 1 00:01:15.908: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE5,
RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 18:32 by prod_rel_team
*Mar 1 00:01:18.651: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
down
*Mar 1 00:01:18.659: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
*Mar 1 00:01:20.178: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Mar 1 00:01:23.181: %PLATFORM-6-FRULINK_INSERTED: FRULink 1G module inserted.


--- System Configuration Dialog ---

Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enab
le secret
If you choose not to enter the intial configuration dialog, or if you exit setup
without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: n
Switch> Please Click Here to Visit Our StoreSearchBy37 - 260847 | Loc: E76 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: L FREESHIP - 20LBS |22.00"x20.00"x5.00"29.00lbs |Start: $0.00 | BIN: $99.99 | |2024-05-16 ||Computers/Tablets & Networking::Enterprise Networking, Servers::Switches & Hubs::Network Switches

Buy Now