(Power supply not included)
- Supports Virtual LAN(VLAN) ON/OFF
(When the VLAN mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety.)
- Up to 30w/port of Power on
- Complies to IEEE 802.3af/802.3at PoE standard
- Compatible with All IEEE 802.3af/802.3at
- Safe: Low power Devices Receive Only the Power They Need
- Safe and Reliable Power to WLAN Access Points
- Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
- Supports 10/100/1000 Base-T
- Compact Design Fits Easily in WLAN Access
- Plug-and-Play no configuration required
- Each port supports auto MDI/MDIX
ALL LAN/WAN Port:
Standard 1000Mbps Ethernet port. can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5e/6 cable。
LAN Port 1-4:
any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs)
Virtual LAN:
ON/OFF
LED
Power (Red)
PoE In-Use and 1000 LNK / ACT(Orange LAN Port)
10/100 LNK / ACT(Green)
Product Dimensions
132mmW x 66mm D x 32mmH
Weight
270g(only switch)
Power Requirement
5.5x2.1JackInput Voltage 48~57VDC
PoE Standard
IEEE 802.3af, IEEE802.3at
PoE Power Output
48V-57VDC, Max. 30Watt/port
PoE Power Supply Type
pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan
Regulation Compliance
FCC Part 15 Class A, CE
Operating
Temperature: 0~50 Degree C, Relative Humidity: 20~95%
Storage
Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing)
Standards Compliance
IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-Tx
IEEE 802.3z: 1000Base-Tx
IEEE 802.3x: Flow Control
(Power supply not included)
![Buy Now Buy Now](buy.gif)