E3D Revo™ Prusa Edition RapidChange Hot End (Revo MK3 and Mini) Builder Introducing the new E3D Configurable Revo-lution! A Revo Kit contains a cold-side and a hot-side. With our builder you can order all of these in one place. Configurator Hot Side packs contain 5 package types (Starter, High Flow, High Flow X, Genius 400 and Genius Metal). Each package type contains the following: Starter: 0.4mm Brass Nozzle 0.6mm Brass Nozzle 40W HeaterCore High Flow: 0.4mm Brass High Flow Nozzle 0.6mm Brass High Flow Nozzle 60W HeaterCore BONUS 0.4mm Brass Nozzle BONUS Revo Sock Pack High Flow X: 0.4mm ObXidian High Flow Nozzle 0.6mm ObXidian High Flow Nozzle 60W HeaterCore BONUS 0.4mm Brass Nozzle BONUS Revo Sock Pack Genius 400: 0.4mm ObXidian Nozzle 0.6mm High Flow ObXidian Nozzle 0.4mm Brass Non Planar Nozzle 0.6mm HighTemperature (HT) Abrasive Nozzle 60W HeaterCore HT HotSide HP Heater BONUS 0.25mm Brass Nozzle BONUS Revo Sock Pack Genius Metal: 0.4mm ObXidian Nozzle 0.6mm High Flow ObXidian Nozzle 0.4mm Brass Non Planar Nozzle 0.6mm HighTemperature (HT) Abrasive Nozzle 0.4mm DiamondBack Nozzle 60W HeaterCore HT HotSide HP Heater BONUS 0.25mm Brass Nozzle BONUS Revo Sock Pack Other E3D Revo products giving you even more choice: Complete Hot End Builders: Revo Voron Builder Revo Six Builder Revo Hemera Builder Revo Prusa Builder Revo Roto Builder Revo Creality Builder Revo LGX Micro Builder Nozzles: Revo Brass Nozzles Revo High Flow Brass Nozzles Revo ObXidian Nozzles Revo High Flow ObXidian Nozzles Revo Diamondback Nozzles Revo High-Temperature HT-Abrasive Nozzles Other Parts: Revo Sock Packs Revo Six Heatsink Revo Voron Heatsink Revo Extension Kit Revo Replacement Springs Revo 60W HeaterCore Revo 40W HeaterCore Revo High-Temperature Heater Cartridge Abrasive Revo High Temperature HeaterBlock No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print. Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today. Enhanced performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium HeaterBlock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway. A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd. Please note: - You may need to adjust your Z offset when changing nozzles. E3D Revo™ Prusa Edition RapidChange Hot End (Revo MK3 and Mini) Builder
Introducing the new E3D Configurable Revo-lution! A Revo Kit contains a cold-side and a hot-side. With our builder you can order all of these in one place.
Configurator Hot Side packs contain 5 package types (Starter, High Flow, High Flow X, Genius 400 and Genius Metal). Each package type contains the following:
- 0.4mm Brass Nozzle
- 0.6mm Brass Nozzle
- 40W HeaterCore
- 0.4mm Brass High Flow Nozzle
- 0.6mm Brass High Flow Nozzle
- 60W HeaterCore
- BONUS 0.4mm Brass Nozzle
- BONUS Revo Sock Pack
- 0.4mm ObXidian High Flow Nozzle
- 0.6mm ObXidian High Flow Nozzle
- 60W HeaterCore
- BONUS 0.4mm Brass Nozzle
- BONUS Revo Sock Pack
- 0.4mm ObXidian Nozzle
- 0.6mm High Flow ObXidian Nozzle
- 0.4mm Brass Non Planar Nozzle
- 0.6mm HighTemperature (HT) Abrasive Nozzle
- 60W HeaterCore
- HT HotSide HP Heater
- BONUS 0.25mm Brass Nozzle
- BONUS Revo Sock Pack
- 0.4mm ObXidian Nozzle
- 0.6mm High Flow ObXidian Nozzle
- 0.4mm Brass Non Planar Nozzle
- 0.6mm HighTemperature (HT) Abrasive Nozzle
- 0.4mm DiamondBack Nozzle
- 60W HeaterCore
- HT HotSide HP Heater
- BONUS 0.25mm Brass Nozzle
- BONUS Revo Sock Pack
Other E3D Revo products giving you even more choice:
Complete Hot End Builders:Revo Voron BuilderRevo Six BuilderRevo Hemera BuilderRevo Prusa BuilderRevo Roto BuilderRevo Creality BuilderRevo LGX Micro BuilderNozzles:Revo Brass NozzlesRevo High Flow Brass NozzlesRevo ObXidian NozzlesRevo High Flow ObXidian NozzlesRevo Diamondback NozzlesRevo High-Temperature HT-Abrasive Nozzles
Other Parts:Revo Sock PacksRevo Six HeatsinkRevo Voron HeatsinkRevo Extension KitRevo Replacement SpringsRevo 60W HeaterCoreRevo 40W HeaterCoreRevo High-Temperature Heater Cartridge AbrasiveRevo High Temperature HeaterBlock
No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print.
Ready for Revo. Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.
A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.
Please note:
- You may need to adjust your Z offset when changing nozzles.
×
Shipping info Click the Shipping & Payments tab above the listing description for more info
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Additional Information No additional information at this time
Ask seller a question
You might also like AMBROSIA Über ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS F AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Pre AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Prem Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© West3D Printing
Shipping & Payments Click the Shipping & Payments tab above the listing description for more info
Payment Accepted Payment Methods
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Returns Returns are accepted
Items must be returned within 30 days of the sale ending
Seller will pay for return shipping.
integration by
