 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- ✅【Protection Technology】 The LCDI (Leakage Current Detection Interrupter) utilizes built-in shielded power conductors to sense breakage of hot line and white line in the power cord，avoiding the fire caused by arcing due to the aged power cord and leakage current.
- ✅【Security Assurance】 If a leakage current less than 5mA between the shield wire and the Neutral or Hot wire is detected, the LCDI immediately trips to interrupt the flow of electricity within 0.5s.
- ✅【Suitable for A/C】 The LCDI power cord is suitable for air conditioner loads, such as portable air conditioners, window air conditioners and PTAC (Packaged Terminal Air Conditioner) for indoor use.
- ✅【Easy Installation】 Comes with a 14AWG x 3C power cord of about 2.2 meters long with terminals for Hot wire (black), Neutral wire (white) and Ground wire (green) for easy wiring. Rated 120 Volt 15 Amp, 1800 Watt.
- ✅【UL Certificated】 Designed and tested in accordance with UL. Meet UL1699 requirements.
Product Description - Engineering and manufacturing of electrical safety for over 30 years, ELEGRP is leading innovation and technology upgrade in Ground Fault Circuit Interrupters (GFCI's), Leakage Current Detection and Interruption Devices (LCDI’s), Cord Protection with Portable Residual Current Devices (PRCD), Arc Fault Circuit Interrupters (AFCI’s), Appliance Leakage-Current Interrupters (ALCI's), USB Receptacle, Wire & Cable, Wiring Devices, Wall Plates, Dimmer, Sensor, Night Light, Delayed Switch and so on…
- ELEGRP believes in providing friendly solutions by adopting a consumer-centric and efficient problem-solving approach. Going above and beyond in the future continuously in electrical safety use and smart home appliance, ELEGRP will constantly make explorations and innovations to meet the ever-changing demand of our consumers.
What is LCDI Plug? - The LCDI (Leakage Current Detection Interrupter) utilizes built-in shielded power conductors to sense breakage of hot line and white line in the power cord, avoiding the fire caused by arcing due to the aged power cord and leakage current.
- This product has been evaluated and determined to be suitable for air conditioner loads only in accordance with UL1699.
Why Do I Choose ELEGRP? - 0.5 Seconds to Break the Circuit
The LCDI (Leakage Current Detection Interrupter) utilizes built-in shielded power conductors to sense breakage of hot line and white line in the power cord, avoiding the fire caused by arcing due to the aged power cord and leakage current The LCDI power cord is suitable for air conditioner loads, such as portable air conditioners, window air conditioners and PTAC (Packaged Terminal Air Conditioner) for indoor use This GFCI plug could be used normally in the operating temperature of -31 to 150.8℉ (-35℃ to 66℃) Designed and tested in accordance with UL. Meet UL1699 requirements. ORIGINAL FACTORY PARTS Applicable to all types of Air conditioners including but not limited to the following brands: How to Choose the Right LCDI Plug for My Air Conditioner? NEMA 5-15P 5-15P 5-15P 6-15P Votage 120V 120V 120V 240V Wire Gauge 14AWG 16AWG 18AWG 14AWG Current Model# L15515-14AWG L15515-16AWG L15515-18AWG L15615-14AWG Original Model# 0651515LY 0651513LY 0651510LY 0661515LY  |
|
