Free shipping for the USA
The Framethrower allows seamless standard and RTG video modes to come from your Pi Storm.
Enable High-quality HDMI output of standard OCS/ECS Denise modes to emit via the Raspberry Pi's HDMI port. This allows you to use a single monitor for both Pi Storm RTG video modes and classic Amiga standard modes.
You connect the framethrowers 15 pin to the Raspberry Pi's camera port and therefore requires a Raspberry Pi with a camera port.
15-pin Camera Cable is included,Please check your Raspberry Pi's camera port and verify if it needs a 15 pin or 22 pin cable
- Fully assembled.
- Pre-Flashed and ready to plug in.
- Plugs into the Denise socket.
- Pre-flashed and ready, but you will still need to update Emu68 config files on the SD Card for the Pi (instructions included).
What you will need (not included):
- Pi Storm
- Raspberry Pi with a camera port
- A 22-pin (or 15pin to 22pin) standard Raspberry Pi cable. Please check your Raspberry Pi's camera port and verify if it needs a 15 pin or 22 pin cable before buying.
We reserve the right to change the shipping type/carrier when free shipping is selected to improve speed and/or cost
