UBB Store

GIGABYTE GA-G1.SNIPER B6 LGA 1150 Intel B85 HDMI SATA 6Gb/s USB 3.0 Motherboard
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
GIGABYTE GA-G1.SNIPER B6 LGA 1150 Intel B85 HDMI SATA 6Gb/s USB 3.0 Motherboard
Price: CN $80.99

MotherboardIntroduction

CPU

  1. Support for Intel®Core™ i7 processors/Intel®Core™ i5 processors/ Intel®Core™ i3 in the LGA1150 package
  2. L3 cache varies with CPU

(Please refer \"CPU Support List\" for more information.)

Chipset

Intel®B85 Express Chipset

Memory

  1. 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. Dual channel memory architecture
  3. Support for DDR3 1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer \"Memory Support List\" for more information.)

Onboard Graphics

Integrated Graphics Processor - Intel®HD Graphics support:

  1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200
  2. 1 x DVI-D port, supporting a maximum resolution of 1920x1200
    * The DVI-D port does not support D-Sub connection by adapter.
  3. 1 x HDMI port, supporting a maximum resolution of 4096x2160
    * Support for HDMI 1.4a version.
  4. Support for up to 3 displays at the same time
  5. Maximum shared memory of 1 GB

Audio

Realtek®ALC1150 codec

TI Burr Brown®OPA2134 operational amplifier

High Definition Audio

Support for S/PDIF Out

LAN

Intel®GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

  1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
    (The PCIEX16 slot conforms to PCI Express 3.0 standard.)
  2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
    * The M.2 socket shares bandwidth with the PCIEX4 slot. When the M.2 socket is populated, the PCIEX4 slot will operate at up to x2 mode.
  3. 2 x PCI Express x1 slots
    (The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.)
  4. 2 x PCI slots

Storage Interface

Chipset:

  1. 4 x SATA 6Gb/s connectors
  2. 2 x SATA 3Gb/s connectors
  3. 1 x M.2 Socket 3 connector
    * Support for M.2 PCIe SSDs only.
    * The M.2 socket shares bandwidth with the PCIEX4 slot. When the M.2 socket is populated, the PCIEX4 slot will operate at up to x2 mode.

Multi-Graphics Technology

Support for AMD CrossFire™ technology

USB

Chipset:

  1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB headers)
  2. 7 x USB 2.0/1.1 ports (3 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors

  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x M.2 Socket 3 connector
  4. 4 x SATA 6Gb/s connectors
  5. 2 x SATA 3Gb/s connectors
  6. 1 x CPU fan header
  7. 3 x system fan headers
  8. 1 x front panel header
  9. 1 x front panel audio header
  10. 1 x S/PDIF Out header
  11. 1 x USB 3.0/2.0 headers
  12. 2 x USB 2.0/1.1 headers
  13. 1 x serial port header
  14. 1 x Clear CMOS jumper
  15. 1 x audio gain control switch

Back Panel Connectors

  1. 1 x PS/2 keyboard/mouse port
  2. 1 x D-Sub port
  3. 1 x DVI-D port
  4. 1 x HDMI port
  5. 2 x USB 3.0/2.0 ports
  6. 3 x USB 2.0/1.1 ports
  7. 1 x RJ-45 port
  8. 1 x optical S/PDIF Out connector
  9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)

I/O Controller

iTE®I/O Controller Chip

H/W Monitoring

  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System fan speed detection
  4. CPU/System overheating warning
  5. CPU/System fan fail warning
  6. CPU/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.

BIOS

  1. 2 x 64 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

  1. Support for Q-Flash
  2. Support for Xpress Install
  3. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    atBIOS
    EasyTune
    EZ Setup
    USB Blocker
  4. Support for ON/OFF Charge

Operating System

Support for Windows 10/8.1/8/7

Form Factor

ATX Form Factor; 30.5cm x 23.4cm



Buy Now