FrageHOTLINE[phone removed by ]
show offer in englishHP Virtual Connect SE F32 6x QSFP28 100GbE / 32Gb FC FibreChannel Network switch Module Synergy 12000 867796-B21
Unser Preis: 892,00 €
inkl. MwStTechnical data:Hersteller / OEM: / HP Modell: SE F32 100Gb PN: 867796-B21 # Controller Typ: Netzwerk Modul Host Bus: Modul Schnittstellen: 8x QSFP28 100 Gb Nettogewicht: 4,308 kg Artikelabmessung: L: 43 cm | B: 29 cm | H: 4 cm Physical Interfaces:
- 6x QSFP28 external uplink ports configurable as
1x100GbE, 1x40GbE, 4x25GbE 4x10GbE or 1x 25Gb 1x 10Gb Ethernet network ports or 1x 32Gb, 1x 16Gb, 1x 8Gb FC Fibre Channel connected to external LAN switches
- 12 x 25/50GbE downlinks to compute blade module Ethernet Adapters
- 1x RJ-45 port - not specified
- The FlexHBA can be configured to transport either Fiber Channel over Ethernet/CEE or Accelerated iSCSI protocol.
- Each FlexNIC and FlexHBA is recognized by the compute module as a PCIe physical function device with adjustable speeds from 250Mb to 25Gb in 250Mb increments when connected to a 2-port 25GbE Converged Network Adapter and from 500Mb to 50Gb in 500Mb increments when connected to a Dual-Port 50Gb Converged Network Adapter- xtended list of direct attach copper cable connections supported
- Low latency (sub 1.0 µs Ethernet ports) throughput provides switch-like performance.
- Line-rate, full-duplex 6.4 Tbps bridging fabric
- MTU up to 9216 Bytes - Jumbo Frames
- Supports up to 48K L2 MAC entries
- VLAN Tagging and Link Aggregation supported on all uplinks
- Supports up to 4K IPMC entriessupported HPE Synergy Compute Modules
- HPE Synergy 480 Gen10
- HPE Synergy 660 Gen10
- HPE Synergy 480 Gen11supported HPE Interconnect Link Module
- HPE Synergy 50Gb Interconnect Link Module supported HPE Network Adapters
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE Synergy 6820C 25/50Gb Converged Network Adapterthe maximum bandwidth of any QSFP28 port is 100Gbps, when 4x32Gbps Fibre Channel connections are used, each of the Fibre Channel connections signals for 32Gbps speed and setup but is limited to only 25Gbps bandwidth for that connection.If a full 32Gbps bandwidth is desired for any QSFP28 port, then an HPE QSFP28/SFP28 adapter with a 32Gbps FC transceiver will populate the QSFP28 port. In addition, the user must provision the uplink as a singular (1:1 or Q1 for example) uplink port to achieve the full 32Gbps for FC. If the port is configured in a 4:1 (Q1.1 for example) mode, then the port will be divided into 4 lanes with only 1 lane enabled and will only achieve 25Gbps speed. Management
- Integrated composer based HPE OneView included with every frame, providing out-of-the-box for individual Virtual Connect configuration and management.
- Pre-configure compute modules I/O configurations prior to their installation for easy deployment
- Move, add, or change compute module network connections on the fly without impacting LAN and SAN administrator
- Monitoring via SNMPv1 & SNMPv2 and management via industry standard SNMPv3
- Compute module-side NPIV removes storage management constraint of a single physical HBA on a compute module does not add to SAN switch domains or require traditional SAN management
- Licensing support for native Fibre Channel through Composer powered by OneViewTrunking, Failover and Other Networking Features
- Shared Uplink Sets using Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with upstream switches that conform to IEEE 802.3ad. Ports can alternatively be configured for failover only.
- External ports within a Port Set can be on the same VC Ethernet module or on multiple VC modules within the Logical Interconnect.
- Supports 802.3ad Link Aggregation on server (downlink) ports.VLAN Features
- 802.1Q VLAN supported on uplinks.
- Uplink ports can be configured for VLAN tagging at egress or pass-thru of tagged VLAN packets from Server ports.
- Native VLAN support for untagged packets on a shared uplink set.
- Packets can be targeted to a specific server ports.
- Simultaneous tunneled and mapped VLAN connections to a single logical interconnect.Management Features
- Simple and intuitive Graphical User Interface (GUI) for defining, configuring, and managing all elements of Virtual Connect via composer based HPE OneView.
- Comprehensive administration, definition, and management of Ethernet Network, Shared Uplink Set, SAN Fabric management and Server Profiles.
- Embedded SNMPv3 agents allow Network Management applications to query Virtual Connect for statistics and trap information.
- Any uplink port and downlink port can be used as a dedicated mirrored port for traffic analysis and troubleshooting by a Network Analyzer.
- Domain Management of user accounts, frame, settings, and firmware updates MAC Address Administration allows local administration of predefined or user-defined MAC address ranges.
- WWN Address Administration allows local administration of predefined WWN addresses ranges to allow pre-provisioning of SAN volumes.
- Supported by composer based HPE OneView. Provides centralized network connection management and workload mobility for multiple compute modules.Management and Standards Support
- INCITS FC-BB-5 Rev 2.00 (on all downlinks)
- IEEE 802.1Qbb
- IEEE 802.1Qaz
- IEEE 802.1AB LLDP
- IEEE 802.1Q (VLAN includes Native VLAN support and server side VLAN tag mapping)
- IEEE 802.2 LLC
- IEEE 802.3ad Link Aggregation
- Maximum of 48 LAGs
- Multi-Chassis Link Aggregation
- Maximum of 16 ports per MLAG
- Maximum of 24 uplink MLAGs
- IEEE 802.3ae 10Gb Fiber Ethernet
- IEEE 802.3aq 10Gb LRM Ethernet
- SNMPv3
- IPv6
- FC-BB5 aka FIP snooping on Q1-Q6compatible with:supported HPE Synergy Compute Modules
- HPE Synergy 480 Gen10
- HPE Synergy 660 Gen10
- HPE Synergy 480 Gen11supported HPE Interconnect Link Module
- HPE Synergy 50Gb Interconnect Link Module supported HPE Network Adapters
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE Synergy 6820C 25/50Gb Converged Network Adaptersupported QSFP28 Transceivers for uplink ports
- HPE Synergy 100GbE/4x25GbE/4x32GbFC QSFP28 Transceiver 882251-B21
- HPE 100Gb QSFP28 MPO SR4 100m Transceiver 845966-B21
- Aruba 100G QSFP28 LC LR4 10km SMF 2-strand Transceiver JL310A
- HPE 100Gb QSFP28 offerirectional Transceiver 845972-B21
- HPE X150 100G QSFP28 MPO PSM4 500m SM Transceiver JH420A
- HPE X150 100G QSFP28 CWDM4 2km SM Transceiver JH673A
- HPE X150 100G QSFP28 LC SWDM4 100m MM Transceiver JH419A
Artikelzustand: refurbished / generalüberholt, Grade A. Artikel wurde vom Verkäufer vollständig geprüft / instandgesetzt.Zustand und Lieferumfang
Wenn nicht gesondert in der Artikelbeschreibung angegeben, ist der Artikel gebraucht.
Jedes Gerät wird vor Veröffentlichung des Angebotes und vor dem Versand von unserem Fachpersonal ausgiebig geprüft und gegebenenfalls instandgesetzt.
Der Artikel ist gereinigt, kein Staub, keine sonstigen Verschmutzungen. Bei einem gebrauchten Artikel können normale, übliche Gebrauchsspuren vorhanden sein. Wenn Sie eine Änderung und/oder weitere Upgrades oder zusätzliche Erweiterungen wünschen muss dies in der Kaufabwicklung mit angegeben werden. Auf anderen Kommunikationswegen mitgeteilte Änderungswünsche am Lieferumfang werden nicht HP Virtual Connect SE F32 6x QSFP28 100GbE / 32Gb FC FibreChannel Network switch Module Synergy 12000 867796-B21
Lieferung erfolgt wie beschrieben, ohne weiteres Zubehör, ohne Handbücher, ohne Datenträger und ausschliesslich wie beschrieben. Bitte lesen sie vor dem Kauf die Artikelbeschreibung sorgfältig um Unannehmlichkeiten im Nachgang zu vermeiden. Bei Unklarheiten, bitten wir sie ihre Fragen vor dem Kauf zu stellen um Unannehmlichkeiten im Nachgang zu vermeiden.
Ein Beispiel: Wenn in der Artikelbeschreibung steht: ' Erweiterungen - Zubehör: default: ohne ' Heißt dies, dass ohne ihre Auswahl keine Erweiterungen im Lieferumfang enthalten sind. Bitte setzen sie kein Zubehör voraus, welches nicht explizit in der Artikelbeschreibung bzw. im Lieferumfang aufgeführt wird.
Bedenken sie, insofern es sich bei diesem Artikel um einen gebrauchten, generalüberholten Artikel handelt, unterscheidet sich die Ausstattung des Lieferumfanges ggf. von dem eines Neugerätes. Bitte erfragen sie im Zweifelsfall den genauen Lieferumfang.Gewährleistung
12 Monate Gesetzliche Gewährleistung für Verbraucher nach BGB.
Ort für den Gewährleistungsanspruch ist der Standort des Verkäufers. Instandsetzung erfolgt in den Räumen des Verkäufers. Der Käufer trägt die Kosten für den Transport zum Standort des Sie nicht, uns bei weiteren Fragen jederzeit direkt zu kontaktieren.
Serverschmiede.com GmbH Angeboteweitere Serverkonfigurator Agebote anzeigen ...Adaptec by Microchip ASR-71605 16-Port 6G SAS/SATA...125 EUR325827261890Mellanox 2x 10Gb 25Gb Network Ethernet Controller ...405 EUR225234817781Cisco UCS B200 M4 Blade Server 2x Intel Xeon E5-26...52 EUR223124837131HP Brocade SN6000B 48-Port 16Gb FC FibreChannel SA...1282 EUR325539147829HP ProLiant DL360e G8 Gen8 19" 1U Server 4x 3,5" L...158 EUR225721637861IBM All Flash AF 900 Raid SAN Storage 9843-AE2 8/1...128 EUR224921017212Besuchen Sie unseren Shop und konfigurieren sie sich Ihren Server nach ihren Wünschen und Vorstellungen!
Wählen aus unseren Prozessoren, Arbeitsspeicher, Festplatten, zusätzlichen Controllerkarten genau die Komponenten welche sie benötigen. Stellen sie sich ihr System nach Ihren Bedürfnissen und Anforderungen zusammen.
Zahlen sie nur für die Komponenten die sie wirklich brauchen!
ContactHOTLINE[phone removed by ]
Angebot in deutschHP Virtual Connect SE F32 6x QSFP28 100GbE / 32Gb FC FibreChannel Network switch Module Synergy 12000 867796-B21
Our Price: 892,00 €
incl. VATTechnical data:Vendor: / HP Type: Netzwerk Modul Model: SE F32 100Gb PN: 867796-B21 # Host Bus: Modul Interfaces: 8x QSFP28 100 Gb Net weight: 4,308 kg Dimensions: L: 43 cm | B: 29 cm | H: 4 cm Physical Interfaces:
- 6x QSFP28 external uplink ports configurable as
1x100GbE, 1x40GbE, 4x25GbE 4x10GbE or 1x 25Gb 1x 10Gb Ethernet network ports or 1x 32Gb, 1x 16Gb, 1x 8Gb FC Fibre Channel connected to external LAN switches
- 12 x 25/50GbE downlinks to compute blade module Ethernet Adapters
- 1x RJ-45 port - not specified
- The FlexHBA can be configured to transport either Fiber Channel over Ethernet/CEE or Accelerated iSCSI protocol.
- Each FlexNIC and FlexHBA is recognized by the compute module as a PCIe physical function device with adjustable speeds from 250Mb to 25Gb in 250Mb increments when connected to a 2-port 25GbE Converged Network Adapter and from 500Mb to 50Gb in 500Mb increments when connected to a Dual-Port 50Gb Converged Network Adapter- xtended list of direct attach copper cable connections supported
- Low latency (sub 1.0 µs Ethernet ports) throughput provides switch-like performance.
- Line-rate, full-duplex 6.4 Tbps bridging fabric
- MTU up to 9216 Bytes - Jumbo Frames
- Supports up to 48K L2 MAC entries
- VLAN Tagging and Link Aggregation supported on all uplinks
- Supports up to 4K IPMC entriessupported HPE Synergy Compute Modules
- HPE Synergy 480 Gen10
- HPE Synergy 660 Gen10
- HPE Synergy 480 Gen11supported HPE Interconnect Link Module
- HPE Synergy 50Gb Interconnect Link Module supported HPE Network Adapters
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE Synergy 6820C 25/50Gb Converged Network Adapterthe maximum bandwidth of any QSFP28 port is 100Gbps, when 4x32Gbps Fibre Channel connections are used, each of the Fibre Channel connections signals for 32Gbps speed and setup but is limited to only 25Gbps bandwidth for that connection.If a full 32Gbps bandwidth is desired for any QSFP28 port, then an HPE QSFP28/SFP28 adapter with a 32Gbps FC transceiver will populate the QSFP28 port. In addition, the user must provision the uplink as a singular (1:1 or Q1 for example) uplink port to achieve the full 32Gbps for FC. If the port is configured in a 4:1 (Q1.1 for example) mode, then the port will be divided into 4 lanes with only 1 lane enabled and will only achieve 25Gbps speed. Management
- Integrated composer based HPE OneView included with every frame, providing out-of-the-box for individual Virtual Connect configuration and management.
- Pre-configure compute modules I/O configurations prior to their installation for easy deployment
- Move, add, or change compute module network connections on the fly without impacting LAN and SAN administrator
- Monitoring via SNMPv1 & SNMPv2 and management via industry standard SNMPv3
- Compute module-side NPIV removes storage management constraint of a single physical HBA on a compute module does not add to SAN switch domains or require traditional SAN management
- Licensing support for native Fibre Channel through Composer powered by OneViewTrunking, Failover and Other Networking Features
- Shared Uplink Sets using Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with upstream switches that conform to IEEE 802.3ad. Ports can alternatively be configured for failover only.
- External ports within a Port Set can be on the same VC Ethernet module or on multiple VC modules within the Logical Interconnect.
- Supports 802.3ad Link Aggregation on server (downlink) ports.VLAN Features
- 802.1Q VLAN supported on uplinks.
- Uplink ports can be configured for VLAN tagging at egress or pass-thru of tagged VLAN packets from Server ports.
- Native VLAN support for untagged packets on a shared uplink set.
- Packets can be targeted to a specific server ports.
- Simultaneous tunneled and mapped VLAN connections to a single logical interconnect.Management Features
- Simple and intuitive Graphical User Interface (GUI) for defining, configuring, and managing all elements of Virtual Connect via composer based HPE OneView.
- Comprehensive administration, definition, and management of Ethernet Network, Shared Uplink Set, SAN Fabric management and Server Profiles.
- Embedded SNMPv3 agents allow Network Management applications to query Virtual Connect for statistics and trap information.
- Any uplink port and downlink port can be used as a dedicated mirrored port for traffic analysis and troubleshooting by a Network Analyzer.
- Domain Management of user accounts, frame, settings, and firmware updates MAC Address Administration allows local administration of predefined or user-defined MAC address ranges.
- WWN Address Administration allows local administration of predefined WWN addresses ranges to allow pre-provisioning of SAN volumes.
- Supported by composer based HPE OneView. Provides centralized network connection management and workload mobility for multiple compute modules.Management and Standards Support
- INCITS FC-BB-5 Rev 2.00 (on all downlinks)
- IEEE 802.1Qbb
- IEEE 802.1Qaz
- IEEE 802.1AB LLDP
- IEEE 802.1Q (VLAN includes Native VLAN support and server side VLAN tag mapping)
- IEEE 802.2 LLC
- IEEE 802.3ad Link Aggregation
- Maximum of 48 LAGs
- Multi-Chassis Link Aggregation
- Maximum of 16 ports per MLAG
- Maximum of 24 uplink MLAGs
- IEEE 802.3ae 10Gb Fiber Ethernet
- IEEE 802.3aq 10Gb LRM Ethernet
- SNMPv3
- IPv6
- FC-BB5 aka FIP snooping on Q1-Q6compatible with:supported HPE Synergy Compute Modules
- HPE Synergy 480 Gen10
- HPE Synergy 660 Gen10
- HPE Synergy 480 Gen11supported HPE Interconnect Link Module
- HPE Synergy 50Gb Interconnect Link Module supported HPE Network Adapters
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE Synergy 6820C 25/50Gb Converged Network Adaptersupported QSFP28 Transceivers for uplink ports
- HPE Synergy 100GbE/4x25GbE/4x32GbFC QSFP28 Transceiver 882251-B21
- HPE 100Gb QSFP28 MPO SR4 100m Transceiver 845966-B21
- Aruba 100G QSFP28 LC LR4 10km SMF 2-strand Transceiver JL310A
- HPE 100Gb QSFP28 offerirectional Transceiver 845972-B21
- HPE X150 100G QSFP28 MPO PSM4 500m SM Transceiver JH420A
- HPE X150 100G QSFP28 CWDM4 2km SM Transceiver JH673A
- HPE X150 100G QSFP28 LC SWDM4 100m MM Transceiver JH419A
Item condition: refurbished, Grade A. The item has been completely tested / refurbished.Item condition/Shipping
Wenn nicht gesondert in der Artikelbeschreibung angegeben, ist der Artikel gebraucht.
Technical condition: No technical flaws. The article has been checked by our professionals before publishing.
Optical condition: The server is secondhand and doesn't show optical flaws. The article is cleaned, no dust or anything. Only normal signs of usage.
Memory devices have been formatted if not displayed otherwise. Latest free available firmware has been flashed on system bios, storage controller, network controller and management controller. If you wish any changes, upgrades or other expansions please note at . We can't consider requests concerning delivery contents via other ways of communication.
Delivery: HP Virtual Connect SE F32 6x QSFP28 100GbE / 32Gb FC FibreChannel Network switch Module Synergy 12000 867796-B21
Delivery is as described, without further accessories, without manuals, without data carriers, exclusively as described. Please read carefully before buying the item description to avoid inconvenience in the aftermath. In case of doubt, we ask you to ask your questions before buying to avoid inconvenience in the aftermath.
For example: If the article description says: 'CPU Processor: default: without CPU ' Does this mean that without their selection no processors are included. Please do not assume any accessories that are not explicitly listed in the item description or in the scope of delivery.
Please bear in mind, as far as this article is a used, refurbished article, the equipment of the delivery may differ from that of a new device. Warranty
12 month warranty required by law for customers according to German Civil Code. Place of warranty claim is the location of the seller. Repair will be effected in the sellers business premisses. The customer covers the cost of the transport to the location of the seller.
Contact
Please contact us if you have questions about available options.
Serverschmiede.com GmbH Offersshow more offers ... Adaptec by Microchip ASR-71605 16-Port 6G SAS/SATA...173 EUR222998292885Dell Broadcom 57414 2x 10/25Gb SFP28 PCIe x8 LAN N...203 EUR326557462746Cisco C240 M5 8x 2,5" SFF 2x Intel XEON Scalable L...299 EUR325420262033Dell PowerEdge R740xd 19" 2U 24x 2,5" SFF 2x Intel...552 EUR3266887933262x LSI MegaRAID 9361-8i 12G SAS PCIe x8 1GB Cache ...256 EUR324156433197Visit our shop and customize your Server especially your needs and wishes!
Choose CPU's, Memory, HDD's, SSD's, Controllers for ex. Quad Gigabit LAN Controllers, 10Gb LAN Controllers, 4, 8, 16Gb FibreChannel, SAS Controllers and many more options available.
