HPE 100GbE HDR100 QSFP56 2P PCI-e 4 x16 Ethernet/InfiniBand Network Adapter NICThis listing is for one HPE Mellanox/nVidia Dual Port 100GbE and HDR100 (Ethernet/Infiniband) PCI-e network adapterWe can integrate this in a full solution, please contact usPlease note: this adapter needs to be connected to Gen4 PCI-e x16 slot to have 100Gb/s rates on both portsComes with Full Height and Low Profile bracketsPlease contact us with any questionsThank youLOC: OFC-ST-R8-S2+6Manufacturer specifications:MCX653106A-ECAT SpecificationsPlease make sure to install the ConnectX-6 card in a PCI-e slot that is capable of supplying the required power and airflow as stated inthe below table.PhysicalAdapterCard Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)Protocol SupportInfiniBand: IBTA v1.4aAuto-Negotiation:1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane) portEthernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SRData Gb/sGen3/4:SERDES @ 8.0GT/s/16GT/s, x16 lanes (2.0 and 1.1 compatible)Adapter Card PowerVoltage: 12V, 3.3VAUXPowerCableTypical PowerbPassive Cables21.0WMaximum PowerPlease refer to ConnectX-6 VPI Power Specifications (requires NVONline login credentials)Voltage: 3.3AuxMaximum current:100mAMaximum power available through QSFP56 port: to 55°CNon-operational-40°C to 70°CHumidity: 90% relative humiditycAirflow (LFM) /Ambient TemperatureCable TypeAirflow DirectionHeatsink to PortPort to HeatsinkPassive Cables350 LFM / 55°C250 LFM / 35°CNVIDIAActive 2.7W Cables550 LFM / 55°C250 LFM / 35°CRegulatorySafety: CB / cTUVus / CEEMC: CE / FCC / VCCI / ICES / RCM / KCRoHS: RoHS CompliantNotes: a.The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental feature only initiates when connected to anotherNVIDIA InfiniBand product.b.Typical power for ATIS traffic load.c. For both operational and non-operational states.This listing is for one HPE Mellanox/nVidia Dual Port 100GbE and HDR100 (Ethernet/Infiniband) PCI-e network adapter
We can integrate this in a full solution, please contact us
Please note: this adapter needs to be connected to Gen4 PCI-e x16 slot to have 100Gb/s rates on both ports
Comes with Full Height and Low Profile brackets
Please contact us with any questions
Thank you
LOC: OFC-ST-R8-S2+6
Manufacturer specifications:
MCX653106A-ECAT Specifications
Please make sure to install the ConnectX-6 card in a PCI-e slot that is capable of supplying the required power and airflow as stated inthe below table.
Physical
AdapterCard Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Protocol Support
InfiniBand: IBTA v1.4a
Auto-Negotiation:1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane) port
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
Data Rate
InfiniBand
SDR/DDR/QDR/FDR/EDR
Ethernet
1/10/25/40/50/100 Gb/s
Gen3/4:SERDES @ 8.0GT/s/16GT/s, x16 lanes (2.0 and 1.1 compatible)
Adapter Card Power
Voltage: 12V, 3.3VAUX
Power
Cable
Typical Powerb
Passive Cables
21.0W
Maximum Power
Please refer to ConnectX-6 VPI Power Specifications (requires NVONline login credentials)
Voltage: 3.3Aux
Maximum current:100mA
Maximum power available through QSFP56 port: 5W
Environmental
Temperature
Operational
0°C to 55°C
Non-operational
-40°C to 70°C
Humidity: 90% relative humidityc
Airflow (LFM) /
Ambient Temperature
Cable Type
Airflow Direction
Heatsink to Port
Port to Heatsink
Passive Cables
350 LFM / 55°C
250 LFM / 35°C
NVIDIAActive 2.7W Cables
550 LFM / 55°C
250 LFM / 35°C
Regulatory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a.The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental feature only initiates when connected to anotherNVIDIA InfiniBand product.
b.Typical power for ATIS traffic load.
c. For both operational and non-operational states.
![Buy Now Buy Now](buy.gif)