• Home
• Contact ProCurve E3800 24G-2XG Layer 3 Managed SwitchPN:J9585A24 Port 10/100/10002 Port 10GB Ethernet
  Rack mountable - 1U

  AB0119

  AB0619

  Condition: Tested and Reset to Factory Defaults - see pictures.

  HPE Lifetime Warranty - see picture

  Product Description: Includes Rack Mounts

  Power lead not included (If lead is required please add $15)

  Ports:

  24 x 1G / 1000-Base-T

  2 x 10G / 10GBase-T

  Product:HP 3800-24G-2XG SwitchSerial number:SG2BG0X564 / SG45G0X267Product number:J9585A

  
  

  
  

  • Brand: HP
  • Model: J9585A
  • Ports: 24 x 10/100/1000 + 2 x 10Gb Ethernet
  • 19 inch Rackmountable: Rackmounts Included
  • Power Supply: Uses Proprietary Power Cable -Not Included

  
  

  The HP 3800 Switch Series is a family of nine fully managed Gigabit Ethernet switches available in 24-port and 48-port models, with or without PoE+, and with either SFP+ or 10GBASE-T uplinks. The 3800 Switch Series utilizes the latest HP ProVision ASIC technology and advances in hardware engineering to deliver one of the most resilient and energy-efficient switches in the industry. Meshed stacking technology is implemented in the HP 3800 Switch Series to deliver chassis-like resiliency in a flexible, stackable form factor.
  
  Features:

  • Manufacturer: HP
  • Model/Part: J9585A
  • Model: 3800-24G-2XG Switch
  • OpenFlow
  • Advanced classifier-based QoS

  
  
  More Features : Flow control, layer 2 switching, DHCP support, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, IPv6 support, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, STP Root Guard, Uni-Directional Link Detection (UDLD), fan tray, MAC address lockout
  

• – Increased resiliency: provides secondary power supply to enable complete switch power redundancy in case of power line or supply failure

• – Increased PoE+ power: provides the secondary power supply to increase the total available PoE+ powerDistributed trunking
  enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing

  SmartLink

  provides easy-to-configure link redundancy of active and standby links

  switching

  IEEE 802.1ad QinQ

  increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high- speed campus or metro network
  IEEE 802.1v protocol VLANs
  isolate select non-IPv4 protocols automatically into their own VLANs

  MAC-based VLAN

  provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs

  Rapid Per-VLAN Spanning Tree (RPVST+)

  allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

  Hewlett Packard Enterprise switch meshing

  dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent Layer 3 routing
  GVRP and MVRP
  allows automatic learning and dynamic assignment of VLANs

  VLAN support and tagging

  supports the IEEE 802.1Q standard and 4094 VLANs interface address

  defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
  Route maps
  provide more control during route redistribution; allow filtering and altering of route metrics

  User Datagram Protocol (UDP) helper function

  allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses; and helps prevent server spoofing for UDP services such as DHCP
  DHCP server
  centralizes and reduces the cost of IPv4 address management

  routing

  Static IP routing

  provides manually configured routing for both IPv4 and IPv6 networks

Terms & Conditions

• Products found to be physically damaged by customer or during return transit due to inadequate/unprotected packaging (returned items should be shipped in protective packing similar as when shipped to Customer), warranty will be voided and cannot be exchanged or refunded.
• All returned items will be tested upon arrival and will attract a handling fee of $20 plus return postage to customer if found to be in correct working condition.
• The benefits provided to you under the various warranty of different items are in addition to other rights and remedies available to you under the Australian Competition and Consumer Act. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For more information visit Australian Consumer Law's website.

30 Days Change of Mind Returns

If you receive a purchase, and you have decided that it does not meet your needs, we can accept a return for refund (Excluding delivery costs) or replacement if the following terms are met the following condition:

• The item must be returned to us within 30 days of delivery in original undamaged packaging.
• The item must be factory sealed and unused, or at the same condition as it was delivered, in order to be approved for a full refund.
• If the item has been opened, a restocking fee of 20% may apply, as the goods are no longer considered brand new.
• In the event that the product has been used, the restocking fee charged may be up to 50%.
• Any delivery or insurance costs incurred are not refundable.
• We reserve the right to refuse a refund on a returned item if the item is not in resalable condition (eg. damaged or missing packaging, missing or damaged parts)

Payment & Pick Up Option

We accept PayPal and Bank Deposit for payment.Our Bank Details:Account Name:KlearviewBank:ANZBSB:012291Account Number:494937134

Please use your Username as payment reference (not item number).
Order will be process after payment clears.

Pickup is available withprior arrangements only. PleaseContact Usbefore buying on .