HUAWEI TE50 HD Videoconferencing Endpoint 1080p 60fps H.264 HP, IPv4, IPv6 WiFi SYSTEMNext-Generation H.264 HP and VME Dual-Core TechnologiesDual streams (video + presentation) of up to 1080p 60 fps are supported.The H.264 HP technology, combined with Huawei's proprietary Video Motion Enhancement (VME) technology, optimizes video images to be more pleasing to eyes while reducing the bandwidth consumption by 50%.Through intelligent face recognition and back-end video enhancement, the VME technology improves light adaptability, reduces bandwidth consumption, improves image definition, and enhances motion images.The endpoint provides users with high-fi audio using MPEG-4 Low Delay Audio Coder (AAC-LD), acoustic echo cancellation (AEC), and automatic noise suppression (ANS) technologies.
Port
Description and Quantity
Standards and Protocols Compliance
Remarks
Video input
- 1 x HD-VI/DVI
- 1 x HDMI/DVI (audio input supported)
- 1 x VGA/YPbPr
- 1 x 3G-SDI
- 1 x CVBS
- The HD-VI port is used to connect to a VPC600 or VPC620.
- The VPT300 can be connected using the HD-VI or HDMI video input port.
- The 3G-SDI port is connected to coaxial cable to support a maximum transmission distance of 60 m.
Video output
- 2 x HDMI/DVI (audio output supported)
- 1 x VGA/YPbPr
- 1 x 3G-SDI
- 1 x CVBS
- The HDMI port does not support YPbPr output.
- The 3G-SDI port is connected to coaxial cable to support a maximum transmission distance of 60 m.
Audio input
- 1 x XLR
- 2 x RCA
- 1 x HDMI
- 1 x HD-AI
- 1 x 3.5 mm
HDMI 1.3
-
Audio output
HDMI 1.3
-
USB port
2 x USB 2.0
USB 2.0
-
Network port
- 2 x 10/100/1000 Mbit/s LAN
- 1 x Wi-Fi (built-in)
- 1 x PSTN
-
Currently, the PSTN port can be used in China only.
Serial port
2 x RS232 COM
-
Connects to the HUAWEI VPT300 intelligent camera through a serial cable when the camera is connected through the HDMI port.
Infrared remote control port
Infrared signal reception
NEC
Control using IR capable cameras.
Rear panel
Table 4-1Port description
Port Type
No.
Description
Function
Audio input
1
Microphone input port, that is, XLR port
Connects the XLR port on a microphone for audio collection and input at a site.
2
RCA port
- L: left audio channel
- R: right audio channel
Connects to an audio input source, such as a computer or mobile phone.
5
Microphone array port
Connects to a microphone array, for example, HUAWEI VPM220.
24
Line audio input port, which consists of left and right audio channels
Connects to a tuning console.
Audio output
3
RCA port
- L: left audio channel
- R: right audio channel
Connects to an external speaker as a Line 1 port. It is a reserved audio output port.
Connects to the 3.5 mm audio input port on the Huawei VPT300 intelligent camera.
4
RCA port
- L: left audio channel
- R: right audio channel
Connects to a recording device as a Line 2 port, and records sounds of the local and remote sites.
Connects to the 3.5 mm audio input port on the Huawei VPT300 intelligent camera.
Video input
9
Proprietary camera port, which consists of two layers
Connects to the Huawei VPC620/600 HD camera or the Huawei VPT300 intelligent camera as the first input.
10
VGA port, which supports VGA and YPbPr
Connects to a presentation source, such as a computer, as the second input.
Connects to the Huawei VPT300 intelligent camera through two conversion cables.
11
HDMI port, which supports a resolution of up to 1080p 60 fps
20
3G-SDI port, which supports SDI signal input, the 3G-SDI standard, and a resolution of up to 1080p 60 fps
Connects to a secondary camera as the third input.
The 3G-SDI port is connected to coaxial cable to support a maximum transmission distance of 60 m.
21
CVBS port, which supports SD signal input
Connects to a video input device as the first input.
Video output
6
VGA port, which exports VGA or YPbPr signals
Connects to a presentation output device as the third output.
7
HDMI HD video output port, which supports a resolution of up to 1080p 60 fps and does not support YPbPr output
Delivers the shared presentation or video of the remote sites by default as the second output.
8
HDMI HD video output port, which supports a resolution of up to 1080p 60 fps and does not support YPbPr output
Connects to a device for displaying video of the local site as the first output.
22
CVBS port
Connects to an SD display device as the fifth output.
23
3G-SDI connector, which supports the 3G-SDI standard and a resolution of up to 1080p 60 fps
Connects to a display device as the fourth output.
The 3G-SDI port is connected to coaxial cable to support a maximum transmission distance of 60 m.
Others
12
2 x USB port
Connects to a USB device, such as a removable hard disk, USB flash drive, or data card.
13
Dual-mode serial communication port
Connects to a camera control cable and can be used for diagnostics and maintenance.
Connects to the HUAWEI VPT300 intelligent camera through a serial cable when the camera is connected through the HDMI port.
14
10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s full duplex Ethernet ports, which support IP network transparent transmission and network port backup
- LAN1: functions as the main network port.
- LAN2: is used for transparent transmission and network port backup.
15
PSTN port
Connects to a PSTN cable. Currently, this port can be used in China only.
16
Reset button
- When theendpointis powering on, press and hold this button for 10s to enter the mini system.
- When theendpointis running, press and hold this button for 10s to reset theendpointto factory settings.
17
Power input port (100–240 V AC, 50 Hz to 60 Hz)
Connects to a power supply.
18
Power switch
Powers on or off the endpoint.
19
Grounding port
Connects to a ground cable.
Front panel
No.
Component
Description
1
OLED display
Displays the IP address, site number, and indications for startup, upgrade, sleep, and malfunction.
2
Alarm indicator
Turns on when an alarm is generated.
3
Status indicator
Indicates the endpoint status, such as running and standby.
