UOTEK Industrial Grade 100M Network Unmanaged Ethernet Switch DIN-rail 2 Fibers 4 RJ45 Ports UT-60-D4T2SC Single Mode SC
UT-60-D4T2SC is a 100M unmanaged Ethernet switch. It provides DC input, reverse polarity protection; at the same time, it supports DIN-Rail and wall-mounted under industrial standard, easy for installation.
●2 Fiber ports and 4 ethernet Ports RJ45
●Supports full-duplex or half-duplex
●10/100m auto negotiation
●Auto MDI/MDI-X
●Built-in store-and-forward, supports multiple protocols
●Fail, relay output auto alarm function
●Telecom standard, MTBF>300,000 hours
>>Standards
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-T(X), 100Base-F(X)
>>Ports
2pcs 100Base-FX Ports (Optional SC ST FC interface)
RJ45 port:4 x10/100Base-T（X）port, auto detection, full/half-duplex, auto MDI/MDI-X
LED indication: PWR1, PWR2 1～4 RJ-45 port indicator
>>Power requirement
Voltage input: DC12/24/48V, reverse polarity protection
Power consumption: 1A@24V max.
Terminal block: 1 pluggable 6-pin terminal block
Overload protection: Yes
Reverse polarity protection: Yes
>>Mechanical Characteristics
Case: steel
Installation: DIN-Rail/wall-mounted
Dimension(W x H x D):150×47.6×100mm
>>Environment
Operating temperature: -40℃～85℃
Storage temperature: -40℃～85℃
Relative humidity: 0～95% (non-condensing)
>>Industrial standards
EMI: FCC Part 15 Subpart B classA,EN55022 class
IEC(EN)61000-4-4(EFT)
IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)
IEC(EN)61000-4-8
IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)
IEC 60068-2-6(Vibration)
