********Listing for one each item only*********
HPE PN# J9573A
HPE SPARE PART# J9573-61001 J9573-61101
J9573AHPE 3800-24G-PoE+-2SFP+ Switch HP new spare IN HPE Box Sealed
Conditon : HPE new pare partsealed
NOTE: This is HPE SPARE PART MAY NOT COME WITH POWER CORD AND MAY NOT COME WITH RACKMOUNT KIT !
NOTE:Lead time might take 2 week , Please check detail lead time or ETA before purchasing if have rush order.
NOTE:Pictures may or may not be actual item, if need actual pictures or have any other question please send us message.
HP 3800-24G-PoE+-2SFP+ Switch (J9573A)HP 3800-48G-PoE+-4SFP+ Switch (J9574A)HP 3800-24G-2SFP+ Switch (J9575A)Included accessories
1 HP 3800 Switch Fan Tray (J9582A)
1 HP X312 1000W 100-240VAC to 54VDC Power Supply (J9580A)
1 HP 3800 Switch Fan Tray (J9582A)
1 HP X312 1000W 100-240VAC to 54VDC Power Supply (J9580A)
1 HP 3800 Switch Fan Tray (J9582A)
1 HP X311 400W 100-240VAC to 12VDC Power Supply (J9581A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 PoE+ ports
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
2 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 stacking module slot
48 RJ-45 autosensing 10/100/1000 PoE+ ports
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
4 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 stacking module slot
24 RJ-45 autosensing 10/100/1000 ports
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 stacking module slot
Power supplies
2 power supply slots
1 minimum power supply required
includes: 1 x J9580A (HP X312 1000W 100-240VAC to 54VDC Power Supply)
2 power supply slots
1 minimum power supply required
includes: 1 x J9580A (HP X312 1000W 100-240VAC to 54VDC Power Supply)
2 power supply slots
1 minimum power supply required
includes: 1 x J9581A (HP X311 400W 100-240VAC to 12VDC Power Supply)
Fan tray
includes: 1 x J9582Aincludes: 1 x J9582Aincludes: 1 x J9582APhysical characteristics
17.43(w) x 18.4(d) x 1.7(h) in (44.27 x 46.74 x 4.32 cm) (1U height)17.43(w) x 18.4(d) x 1.7(h) in (44.27 x 46.74 x 4.32 cm) (1U height)17.43(w) x 18.4(d) x 1.7(h) in (44.27 x 46.74 x 4.32 cm) (1U height)Weight15.9 lb (7.21 kg) switch chassis with 1 power supply and fan tray installed16.84 lb (7.64 kg) switch chassis with 1 power supply and fan tray installed15.26 lb (6.92 kg) switch chassis with 1 power supply and fan tray installedMemory and processorProcessorHP ProVision ASIC/ARM @ 350 MHz; Freescale P2020 @ 1200 MHz, 4 GB flash, 2 GB SDRAM; packet buffer size: 18 MB dynamicHP ProVision ASIC/ARM @ 350 MHz; Freescale P2020 @ 1200 MHz, 4 GB flash, 2 GB SDRAM; packet buffer size: 36 MB dynamicHP ProVision ASIC/ARM @ 350 MHz; Freescale P2020 @ 1200 MHz, 4 GB flash, 2 GB SDRAM; packet buffer size: 18 MB dynamicMounting and enclosure
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting onlyMounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting onlyMounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting onlyPerformance1000 Mb Latency< 2.8 µs (LIFO 64-byte packets)< 2.8 µs (LIFO 64-byte packets)< 2.8 µs (LIFO 64-byte packets)10 Gb/s Latency< 1.9 µs (LIFO 64-byte packets)< 1.9 µs (LIFO 64-byte packets)< 1.9 µs (LIFO 64-byte packets)Throughputup to 65.4 million pps (64-byte packets)up to 130.9 million pps (64-byte packets)up to 65.4 million pps (64-byte packets)Switching capacity88 Gb/s176 Gb/s88 Gb/sRouting table size10000 entries (IPv4)10000 entries (IPv4)10000 entries (IPv4)MAC address table size65500 entries65500 entries65500 entriesEnvironmentOperating temperature32°F to 131°F (0°C to 55°C); max temperature is 45°C when transceivers are installed32°F to 131°F (0°C to 55°C); max temperature is 45°C when transceivers are installed32°F to 131°F (0°C to 55°C); max temperature is 45°C when transceivers are installedOperating relative humidity15% to 95% @ 104°F (40°C), noncondensing15% to 95% @ 104°F (40°C), noncondensing15% to 95% @ 104°F (40°C), noncondensingNonoperating/Storage temperature-40°F to 158°F (-40°C to 70°C)-40°F to 158°F (-40°C to 70°C)-40°F to 158°F (-40°C to 70°C)Nonoperating/Storage relative humidity15% to 90% @ 149°F (65°C), noncondensing15% to 90% @ 149°F (65°C), noncondensing15% to 90% @ 149°F (65°C), noncondensingAltitudeup to 10,000 ft (3 km)up to 10,000 ft (3 km)up to 10,000 ft (3 km)AcousticPower: 49 dB, Pressure: 33.7 dBPower: 57 dB, Pressure: 41.2 dBPower: 36 dB, Pressure: 26.4 dBElectrical characteristicsFrequency50/60 Hz50/60 Hz50/60 HzMaximum heat dissipation434 BTU/hr (457.87 kJ/hr)635 BTU/hr (669.93 kJ/hr)434 BTU/hr (457.87 kJ/hr)AC voltage100 - 120 / 200 - 240 VAC100 - 120 / 200 - 240 VAC100 - 127 / 200 - 240 VACCurrent9.4/7.8 A9.4/7.8 A6/3 AMaximum power rating127 W186 W127 WIdle power70 W97 W66 WPoE power720 W1080 W
Safety
EN 60950/IEC 60950UL 60950CAN/CSA 22.2 No. 60950EN 60825EN 60950/IEC 60950UL 60950CAN/CSA 22.2 No. 60950EN 60825EN 60950/IEC 60950UL 60950CAN/CSA 22.2 No. 60950EN 60825Notes
Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later, for example, J9142B, J8177C).Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later, for example, J9142B, J8177C).Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later, for example, J9142B, J8177C).
