Overview
Keep your M.2 SSD running cool and stable with the JEYI FinsCold IceGlacier heatsink, an aluminum passive cooler engineered for M.2 2280 NVMe and NGFF SATA drives. Its finned "shark gills" design delivers up to 50 times more surface area than a traditional flat heatsink, so heat escapes faster and your drive stays within a safe operating range.
High-performance SSDs such as the Samsung 980 EVO series can throttle hard under sustained load. With this cooler installed, JEYI testing shows temperature reductions of roughly 10°C to 30°C, helping you protect your data and maintain full read and write speeds during long transfers, gaming sessions, or heavy workloads.
The screw-fixed frame and included soft thermal pads create a firm, even contact between the drive and the aluminum base without putting pressure on the chips, making installation safe and straightforward.
Key Features
- Brand: JEYI
- Model: FinsCold IceGlacier
- Type: M.2 SSD Cooler
- Material: Aluminum
- Thermal Conductivity: 203
- Weight: 100 Grams
- Installed Dimensions: 23.5 mm wide, approximately 32 mm high
Highlights
- ✓ Finned design with up to 50 times the surface area of a standard heatsink for faster heat dissipation
- ✓ Can lower SSD temperatures by an estimated 10°C to 30°C, reducing thermal throttling
- ✓ Screw-fixed frame plus two high-conductivity thermal pads for a snug, chip-safe fit
- ✓ Low-profile footprint that generally clears CPU coolers and graphics cards
- ✓ Includes a screwdriver and thermal pads, so you can install it right out of the box
Usage
Ideal for desktop builds, gaming rigs, workstations, and any system where an M.2 2280 drive runs hot. Simply place the thermal pads on the SSD chips and the back, seat the drive in the aluminum base, and tighten the frame screws for a secure, silent, passive cooling solution with no moving parts or power connection required.
In the Box
- JEYI FinsCold IceGlacier M.2 2280 aluminum heatsink
- Thermal compound pads
- Mounting screws
Please Note
- Check that your motherboard has enough clearance before installation. Once mounted, the cooler measures about 23.5 mm wide and 32 mm high, which may interfere with some CPU coolers or graphics cards.
