Overview:

ZP-SFP Series is an industrial-RS232/RS485/RS422 to fiber optic converter which extends the signal up to 2Km on multimode fiber and 80Km on single mode fiber (transmission distance depends on the SFP module). It can be widely used in various industrial control, process control, stage lighting control, and traffic control occasions. ZP-SFP Series is easy to mount on a DIN rail or in distribution hot pluggable

·Extends Bi-directional RS-232/RS-485/RS-422 up to 2Km on MMF, 80Km on SMF, depend on SFP module.

·EIA /TIA standard RS232/485/422, 0-115, 200 Baud rate

·Serial data is fully transparent, baud rate is self-adaptive, no setting is required

·The high-speed serial data can be used for DMX512 communication in Stage Lighting Control

·Support DIN-Rail & Wall-mount installation.

·Built-in surge and static protection

·Diagnostic and unit indicator LEDs

Specifacation:

1. Model: ZP-SFP Series
2. Fiber Connector: SFP
3. Serial Interface: Industrial Terminal
4. Signal Ports: 1Ch RS232 - 1Mbps；1Ch R485 - 1Mbps；2Ch RS485H- 2Mbps；2Ch RS485H can be grouped into 1Ch High Speed RS422
5. Serial Interface: Industrial Terminal
6. Standard：EIA /TIA RS232/485/422
7. Serial Distance RS232: 15 meters, RS485/422: 1000 meters
8. Rate Max: 2Mbps
9. RS-232: TXD, RXD, GND - Bi-directional
10. RS-485: D+, D-, GND - Bi-directional
11. Power Supply: DC12~48V
12. Power rate: <5W
13. Operation Temperature: -25°C to +75°C
14. Dimensions: 3.74(L)*2.76(W)*1.14(H) Inch
15. Weight: Serial Fiber Media Converter x 1

    L-shaped wall mount bracket x 1

    
    𝟑-𝐢𝐧-𝟏 𝐒𝐞𝐫𝐢𝐚𝐥 𝐏𝐨𝐫𝐭——The serial optic modem has 1Ch RS232 (Full Duplex), 2Ch RS485 (Half Duplex), 1Ch RS422 (Full Duplex)，which all support bi-directional transmission
    𝐒𝐅𝐏 𝐏𝐨𝐫𝐭——The Serial to Fiber Converter adopts open SFP ports, which supports 100Base moudle. You can choose the right module according to your needs. It supports transmission distances of up to 80 km.
    𝐄𝐚𝐬𝐲 𝐭𝐨 𝐔𝐬𝐞——It supports transparent transmission, self-adaptive baud rate. You don’t need to chang the user protocol, plug and play
    𝐃𝐢𝐧-𝐑𝐚𝐢𝐥 & 𝐖𝐚𝐥𝐥 𝐌𝐨𝐮𝐧𝐭 𝐒𝐮𝐩𝐩𝐨𝐫𝐭——It has 35mm Din-rail mounting bracket and wall mount accessory
    𝐈𝐏𝟒𝟎 𝐀𝐥 𝐂𝐚𝐬𝐞—— It uses industrial protection design，having 6KV lighting protection and can work at wide range temperature -25°C to 75°C (-13°F to RS-232/RS-485/RS-422 serial fiber media converter must use in pairs, please order in 2pcs unless you only replace side