Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Micro Swiss NG Revo Extruder is the result of a collaboration between two leading 3D printing companies - Micro Swiss and E3D. This high-quality extruder is designed with both reliability and efficiency in mind, combining the best of both E3D and Micro Swiss technology.This extruder allows for seamless integration of RapidChange Revo technology with the Micro Swiss NG™ extruder line. It is a true drop-in replacement for the CR-10 and Ender 3 series of printers (please see fitment tab for details). The kit includes everything needed to upgrade your printer to a lightweight direct drive system with a Revo hotend, and it comes with solderless, crimpless, butt splice connectors for easy heater cartridge and thermistor connections. The entire installation process takes about 30 minutes, and no firmware modifications are required. Note: 24V Only, if you need 12V you can source E3D heater core here. Features: Lightweight 3:1 Gear ratio Adaptable to wide range of 3D Printers Hardened steel, precision cut Dual Gear drive Bevel Gear system allows a low overhang extruder mount Seamless integration with E3D Revo Hotend Fast and Easy nozzle swaps Made in USA by Micro Swiss Compatible Printers: CR-10 CR-10s CR-10-S5 CR-10-S4 Ender 3 Ender 3 Pro Ender 3 V2 Sunlu S8 Sunlu S8 Pro What is Included: 1x Master Extruder Assembly 1x Adaptation plate 1x LDO Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Revo Hotend assembly 1x Revo CR HeaterCore 24V 1x Revo HeaterCore Spring 1x 0.40mm Brass Revo Nozzle Hardware: 1x Eccentric nut 1x M5 x .8 x 30mm CAP SCREW 1x 5mm ID 10mm OD Washer 1x M5 x .8 Nylon Lock Nut 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs 4x M2.2 x 8mm Thread Forming Screw for Plastic 4x M3 x 12mm Thread Forming Screw for Plastic 5x Zip Ties 4x butt splice connectors Printable shroud and brackets PDF:Installation Instructions - PDF Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
All Prices include GST. Message us if require a tax invoice.
Micro Swiss NG Revo Extruder is the result of a collaboration between two leading 3D printing companies - Micro Swiss and E3D. This high-quality extruder is designed with both reliability and efficiency in mind, combining the best of both E3D and Micro Swiss technology.This extruder allows for seamless integration of RapidChange Revo technology with the Micro Swiss NG™ extruder line. It is a true drop-in replacement for the CR-10 and Ender 3 series of printers (please see fitment tab for details). The kit includes everything needed to upgrade your printer to a lightweight direct drive system with a Revo hotend, and it comes with solderless, crimpless, butt splice connectors for easy heater cartridge and thermistor connections. The entire installation process takes about 30 minutes, and no firmware modifications are required.
Note: 24V Only, if you need 12V you can source E3D heater core here. Gear ratio
Adaptable to wide range of 3D PrintersHardened steel, precision cut Dual Gear driveBevel Gear system allows a low overhang extruder mountSeamless integration with E3D Revo HotendFast and Easy nozzle swapsMade in USA by Micro Swiss
Compatible 3
Ender 3 ProEnder 3 V2Sunlu S8Sunlu S8 ProWhat is Included:
- 1x Master Extruder Assembly
- 1x Adaptation plate
- 1x LDO Stepper motor
- 1x Fan Shroud
- 1x Custom extension cable
- 1x Revo Hotend assembly
- 1x Revo CR HeaterCore 24V
- 1x Revo HeaterCore Spring
- 1x 0.40mm Brass Revo nut
- 1x M5 x .8 x 30mm CAP SCREW
- 1x 5mm ID 10mm OD Washer
- 1x M5 x .8 Nylon Lock Nut
- 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs
- 4x M2.2 x 8mm Thread Forming Screw for Plastic
- 4x M3 x 12mm Thread Forming Screw for Plastic
- 5x Zip Ties
- 4x butt splice connectors
Printable shroud and brackets
PDF:
Installation Instructions - PDF
HAVE A QUESTION OR CONCERN?If you need more information regarding this item, please message us or check on original manfuacturers websites.
DREMC STORE back our products and pride ourselves, not only in quality but in genuine products. Please do not hesitate to reach out to us. We stock the largest range of 3D Printer Spares Parts, from Manufacturer such as E3D-Online, Creality, Slice Engineering, Bondtech, Micro Swiss, LDO Motors, Bigtreetech, Trianglelabs to name a few.
We are the largest Australia Creality Spare Part Distributors based in Brisbane, we stock over 200 SKUs Creality Printers spares parts. Our website store.dremc.com.au for latest stock list and accurate real time stock counter, no hidden stock levels.
Do you need bulk spare parts or DREMC / Polymaker filament discount? Message us now if you require B2B/Educational payment terms.
Please check out our response to see what others are saying about us.
× × × × × ×
Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL/CARD
Please refer to Checkout for available payment method.
Price include GST. Message us if require a tax invoice.
Additional Information No additional information at this time
Ask seller a question
You might also like BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board for Ender 3 Series Ender 5 Official Creality CR-6 Series (CR-6 SE, CR-6 Max, CR-10 Smart) Control Mainboard Titanium Alloy Bi-Metal Heatbreaker For ANYCUBIC Mega S / Mega Pro / Vyper Trianglelab CR6 SE Titanium alloy Bi-Metal Heat break For CR-6 SE Ender 3 Neo Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© DREMC STORE
Postage Click the Postage tab above the listing description for more info
Returns Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
![Buy Now Buy Now](buy.gif)