About this item

• 🏆【600mm/s-King of Speed】With the 600mm/s Printing Speed and 20000mm/s² Acceleration, Creality K1 is 12 times faster than regular FDM 3D printers, raising efficiency greatly.
• 🏆【Rigid Frame & Core XY for Stable Quality】The unibody die-cast aluminum alloy frame of K1 is CNC machined to be precise and rigid, features with the nimble Core XY, Creality K1 enables steady printing at high speed.
• 🏆【Upgraded Ceramic Hotend & Dual Cooling】New ceramic heater, encircling the entire hotend. It heats to 200℃ in 40s and melts the filament instantly. Together with the large fan on the printhead and an 18W auxiliary fan in the build chamber, the model hardens before any stringing and warping could happen.
• 🏆【Hands-free Auto Leveling】An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention.
• 🏆【G-sensor & upgraded Z-axis for delicate model texture】A G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it. No more ghosting or ringing on the print. And the upgraded Z-axis with more accurate positioning reduces Z-banding effectively.
• 🏆【Friendly Note】Before applying power, please check the input voltage and adjust it to meet your need, to avoid damage to the machine; Before applying power, please check that the three platform board fixing screws have been removed to avoid damage to the machine.

Always Print at Full Speed

• With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03s, delivering full speed in 90% of the printing time. K1 is 12 times faster than a regular FDM 3D printer.

Nimble Setup for Speed

• K1 combines the nimble Core XY with a 190g lightweight printhead for less motion inertia. Agile and swift.

32mm³/s Flow in Full Blast

• New ceramic heater, encircling the entire hotend. It heats to 200℃ in 40s and melts the filament instantly. Dual-gear direct extruder, delivering 50N strong extrusion force. Hotend with a titanium alloy heatbreak and a copper alloy nozzle, working with flying colors in up to 300℃.

Model Cooling by Dual Fans

• A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too. The model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.

Creality Print 4.3 with Speed Genes

• The latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.

Speedy Creality OS and Hardware

• K1 adopts the smart Creality OS. It features a straightforward UI, and syncs data and commands with PC, phone, Cloud, and add-on modules. The snappy dual-core 1.2GHz CPU powers high-speed printing with ease. The 8G ROM stores up to 400 model files and enables quick writing and reading.

Connected and Carefree Control

• K1 can print via USB drive or WiFi. With a network connection, K1 can be controlled remotely from Creality Print or Creality Cloud APP/WEB. Cluster control is also allowed when many K1 printers are online. Once the printing is complete or abnormal, a notice will be sent to your phone or PC.

Hands-free Auto Leveling

• An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention.

Self-test with One Tap

• Give a tap, and Kl will self-test the extruder,heatbed, camera (optional), fan, leveling, etc. Any abnormality detected will prompt on the display. So, users can proceed confidently without hitch.

Flexible Build Plate

• Sticky and heat-resistant, it works well with a wide range of filaments. The finely frosted surface makes the model bottom fine and smooth. Bendable for quick print removal.

Quick-heating Heatbed

• The aluminum alloy heatbed spreads heat uniformly and quickly. It reaches 60° in only 180s.

G-sensor & upgraded Z-axis for delicate model texture

• A G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it. No more ghosting or ringing on the print. And the upgraded Z-axis with more accurate positioning reduces Z-banding effectively.

Package Included:

• Creality K1 3D Printer Kit *1

About this item

• 【Smart AI Function】1μm Resolution AI LiDAR: Scan the first layer, if there is any problem, it will stop the printing job giving you quality models. Observant AI Camera: Recognizespaghetti failure, foreign matter, debris, etc. and support real-time monitoring and time-lapse filming.
• 【12X Faster and More Efficient】Creality K1 Max 3d printer, equips 600mm/s printing speed and 20000mm/s² acceleration, it is12 times faster than the other normal 3d printer. Give good printing experience to customers and get a good model in short time.
• 【Size-efficient with Max Capacity】It offers a 300x300x300mm large build volume, which meets more requirement of larger printing model.
• 【Dual Hands-free Auto Leveling】Creality K1 Max 3d printer, its strain sensors in the heatbed for more precise auto leveling without any operation or attention.
• 【More Efficient Function】Core XY Structure makes the printing more stable. Prompt model cooling by a fan on the printhead with directional air ducts and also an auxiliary fan in the build chamber.

Specifications:

• Printing Technology: FDM
• Build Volume: 300*300*300mm
• Product Dimensions: 435*462*526mm
• Package Dimensions: 508*508*608mm
• Net Weight: 18kg
• Gross Weight: 23kg
• Printing Speed: ≤600mm/s
• Acceleration: ≤20000mm/s²
• Printing Accuracy: 100±0.1mm
• Layer Height: 0.1-0.35mm
• Extruder: Dual-gear direct drive extruder
• Filament Diameter: 1.75mm
• Nozzle Diameter: 0.4mm（compatible with 0.6/0.8mm）
• Nozzle Temperature: ≤300℃
• Heatbed Temperature: ≤100℃
• Build Surface: Flexible build plate
• Leveling Mode: Dual hands-free auto leveling
• File Transfer: USB drive, Ethernet, WiFi
• Display Screen: 4.3" color touch screen
• AI Camera: Yes
• AI LiDAR: Yes
• Power Loss Recovery: Yes
• Filament Runout Sensor: Yes
• Input Shaping: Yes
• Lighting Kit: Yes
• Sleep Mode: Yes
• Rated Voltage: 100-240V ~, 50/60Hz
• Rated Power: 1000W
• Supported Filaments: PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF
• Printable File Format: G-Code
• Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
• File Formats for Slicing: STL, OBJ, AMF
• UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese

Package Included:

• Creality K1 Max 3D Printer Kit *1