SainSmart General Purpose Photopolymer Resin

• Rapid UV curing ensures the strength of printing parts and lowers the shrinkage rate. This resin provides you both high toughness and hardness prints.
• The general-purpose resin is compatible with most LCD printers on the market that use 405nm wavelength light.

Note: Please confirm that the UV wavelength of your 3D printer is 405nm.

Recommended Printing Settings:

Number of Base Layer: 8

Base Layer Curing Time: 55s

Normal Layer Curing Time: 6s

Parameters:

Hardness (D): 80 - 82

Viscosity (25C, mPa.s): 150 - 200

Compatiable with EPAX X1, Anycubic Photon, Photon2, WanHao D7, and other LCD printer

Density (g/cm3): 1.08 - 1.13

Flexural Strength (Mpa): 46 - 72

Flexural Modulus (Mpa): 1000 - 1400

Tensile Strength (Mpa): 46 - 67

Elongation at Break (%): 28 - 35

Please shake well before print.

Keep your room well-ventilated while printing.

Do not touch the resin without wearing PPE.

Keep resins sealed tightly in the bottles, out of direct sunlight and within 15℃ - 35℃.

Do not expose resins to heat, flames, sparks or any source of ignition.