Custom built SDrive Max for Atari 8 Bit Computer line from JFCRetro
Includes:

• Sdrive Max unit using 3D self-printed Gray matte colored case (Bambu Lab A1) and SIO attached
• 1 meter USB Type A to USB Type C cable
• Stylus with 2 includes a rerouted SIO cable to the lower side on the corner with rubber bushing
• Device is using the uno2sio interface
  
• Device is configured to use an EXTERNAL Power Source ONLY (USB Type C (use with a 1.5 amp or higher power source) or a 12V DC 5.5 mm barrel jack (center positive))
• Requires a micro SD card (formatted FAT 32), inserted GOLD side up.
• SD card slot is push in and lock type
• Be careful when inserting the SD card, so that you don't drop it inside the case
  
• Optional: requires the sdrive.atr software from kbr-net/sdrive-max/releases/tag/V1.5. Place the sdrive.atr software on the root of the SD card to use the gray configure software instead of the onscreen device menu.
  
• In the photos, there is a clear plastic scratch protector that can/should be removed
• The sdrive will not function properly when there is no SD card installed
  
• Fully tested on original Atari 800/XL/XE line of computers.
• Ship with a basic cheat sheet documentation, please search you tube for "sdrivemax vintage computer" for a great tutorial or search the Atari Age forums.
• Lanyard colors will vary

Built using hardware designs from de-re-sdrive-max.Programmed using the software from kbr-net/sdrive-max.This device was programmed with the SDrive firmware Version 1.5.
The hardware and software designs are of the original authors. JFCRetro is re using their original designs.Reminders:

• These are built in small batches.
• Sold at build cost plus a small assemble fee.
  
• More will be available as they are built.
• The buyer assumes full responsibility for the product. The seller (JFCretro) is not responsible for its use or misuse.

Items are normally shipped weekly on Saturday morning.