SUNLU High Speed PLA Filament 1.75mm

• ①【Print Faster】 -SUNLU high-speed 3D printer PLA filament, designed to turbocharge your printing from slow to swift. Experience a colossal 500% increase in flowability, ensuring smooth printing even at speeds exceeding 250mm/s, without clogs or filament shortages. Bring your ideas to life with high-speed printing, on average, save 70% printing time.

• ②【Efficient Cooling】 -High speed PLA filament boasts a 180% boost in heat dissipation, enabling quicker cooling and curing than regular PLA filament under the same conditions. This prevents 3d filament material buildup during fast prints, improving printing speed while also ensuring accuracy and mechanical performance.

• ③【High Speed PLA Printing Tips】 -The average printing temp of SUNLU High Speed PLA filament is lower than regular PLA filament, saving time and energy consumption. As HS PLA Filament is temperature-sensitive, please set slicing parameters according to recommended print speed and temp matching based on your 3D printer. If stringing occurs, please reduce print temp appropriately.

• ④【Clog-Free and Bubble-Free】 -SUNLU 3d printer PLA filament consistent diameter tolerance 1.75mm ±0.02mm, ensuring tangle-free and knot-free. Rigorous 24-hour pre-packaging drying, plus vacuum-sealing, guarantees moisture-free printing, eliminating clogs and bubbles. Increase your printing success rate.

SUNLU Filament Feature:

【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.Environmentally friendly and non-toxic.Suitable for most FDM 3D Printer & 3D Pen.

3D Filament Storage Tips:

• We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well).
• In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness.
• Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use.

Contact us

The best way to contact us is by messages.
We always reply messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative response before contacting us.
We commit you 100% satisfaction guarantee.

response

1.We will appreciate a positive response with all 5 star rating when you aresatisfied.

2.Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.

3.Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.

4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases

On 23-Feb-2024 at 11:03:10 GMT, seller added the following information:

On Jul 19, 2024 at 04:55:30 PDT, seller added the following information: