 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
About this item - ➽【20% Carbon Fiber Strands 80% PLA】 Carbon Fiber has a very high strength to weight ratio, and is extremely rigid，20% Carbon Fiber Strands, Which a suitable percentage for most of the printers.
- ➽【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
- ➽【Recommended Printing Temp/Nozzle Temperature】: PLA Carbon Fiber 3d filament suggest printing temperature is 200°C - 230°C. Use with Heated Build Platform is recommended (60°C-80°C platform temp is required).
- ➽【99% FDM 3D Printer High Compatiblity】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.
- ➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
On Sep 11, 2023 at 23:40:19 PDT, seller added the following information:  |
|
