UBB Store

SUPER MICRO X7SLM-L LGA775 MOTHERBOARD Pentium D 3.4GHz 2GB RAM Plate, Battery
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SUPER MICRO X7SLM-L LGA775 MOTHERBOARD Pentium D 3.4GHz 2GB RAM Plate, Battery
Price: US $109.98
SUPERMICRO X7SLM-L LGA775 MOTHERBOARD W/ CPU Pentium D 3.4GHz + 2GB RAM & I/O PLATE, New Intel CPU Fan & Heat Sink, Fresh CMOS BatteryTested working, looks great... Pictures are of the actual item you will receive, and packing will be super-safe and secure for shipping!
Key Features
1. Intel® Core™2 Duo, Pentium® D, Pentium 4 & Celeron D in LGA775 Package (FSB 1066/800/533)2. Intel® 945GC Chipset3. Up to 2GB dual channel unbuffered, non-ECC DDR2 667/533/400 SDRAM4. 2x Realtek RTL8111C-GR Gigabit LAN Ports5. 4x SATA (3.0Gbps) Ports RAID 0, 1, 5, 10 (Windows Only)6. 1 (x16) PCI-E, 1 (x4) PCI-E (in x8) 2x 32-bit 33MHz PCI slot7. Onboard GMA950 Video8. 2 rear USB ports + 2 Type A connector + 2 headers (4 ports)
Physical Stats
Form Factor microATXDimensions 9.6" x 8.6 ", (24.4cm x 21.8cm)Processor/Cache
CPU Single LGA775 ZIF SocketSupports an Intel® Core™2 Duo E4000 SeriesSupports an Intel® Pentium® E2000 SeriesSupports an Intel® Pentium® D 945, 935, 925, 915 and 820, 805Supports an Intel® Pentium® 4 600 and 500 SeriesSupports an Intel® Celeron® E1000 SeriesSupports an Intel® Celeron® 400 SeriesSupports an Intel® Celeron® D 300 SeriesSystem Bus 1066 / 800 / 533 MHz system busSystem Memory
Memory Capacity Two 240-pin DIMM slotsSupports up to 2 GB of unbuffered, non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)Memory Type DDR2 667/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMsDIMM Sizes 256 MB, 512 MB, 1 GBMemory Voltage 1.8V onlyOn-Board Devices
Chipset Intel 945GC + ICH7RRealtek RTL8111C-GRSATA Intel ICH7R SATA 3.0Gbps ControllerRAID 0, 1, 5, 10 support (Windows Only)Network Controllers 2x Realtek RTL8111C-GR Gigabit EthernetSupports 10BASE-T, 100/1000BASE-TX, RJ45 outputGraphics Onboard GMA950 videoSuper I/O Winbond 83627DHG chipClock Generator CK505Input / Output
Serial ATA Four Serial ATA ports ( 3Gb/s )Four SATA hard drives supportedIDE One EIDE channel supports up to two UDMA IDE devicesSupports UDMA Mode 5, PIO Mode 4, and ATA/100LAN 2x RJ45 LAN portUSB 8x USB 2.0 / 1.1 compatible2 rear + 2 Type A connector + 2 headers (4 ports)VGA Intel GMA950Keyboard / Mouse PS/2 keyboard and mouse portsSerial Ports 1x Fast UART 16550 serial port1x Serial Header
Chassis ( Optimized for X7SLM-L )
1U Chassis CSE-731i-300BImportant Note To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is recommended.Expansion Slots
PCI-Express 1 (x16) PCI-Express Slot1 (x4) PCI-Express (in x8 slot)PCI 2x 32-bit 33MHz PCI (5V) slotsSystem BIOS
BIOS Type 8Mb Flash EEPROM with AMI BIOSBIOS Features Plug and Play (PnP)APM 1.2DMI 2.3PCI 2.2ACPI 1.0 / 2.0 / 3.0USB Keyboard supportHardware BIOS Virus protectionSMBIOS 2.3Management
Software SuperDoctor® IIIWatch DogNMIPower Configurations ACPI/APM Power ManagementMain Switch Override MechanismSuspend to RAM (STR)Power-on mode control for AC power recoveryInternal / External modem remote ring-onPC Health Monitoring
Voltage Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V/+5V Standby, VBAT, Memory, ChipsetCPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000VFAN Total of five 4-pin fan headers5 x fans with tachometer monitoringStatus monitor for speed controlStatus monitor for on / off controlSupport 3-pin fans (without speed control)Low noise fan speed controlPulse Width Modulated (PWM) fan conn.Temperature Monitoring for CPU and chassis environmentCPU thermal trip supportThermal Control for 5 x Fan ConnectorsI2C temperature sensing logicThermal Monitor 2 (TM2) SupportPECILED CPU / System Overheat LEDSuspend-state indicator LED+5V standby alert LEDOther Features Chassis intrusion DetectionChassis intrusion HeaderSDDC SupportOperating Environment
Environmental Spec. Operating Temperature: 10°to 35°C (50°to 95°F)Non-operating Temperature: -40°to 70°C (-40°to 158°F)Operating Relative Humidity: 8% to 90% (non-condensing)Non-operating Relative Humidity: 5 to 95% (non-condensing)


Buy Now